I. Login Screen a、 You can choose IE、Firefox or other mobile devices to view the video： b、 For IE browser, please download and install the Active X, after that, you can view the video.
c、 Language selection （ when choose “Auto”, it will automatically be compatible with your computer language）： II. Live Video a. Click the button :”Home” button at left, we can back to previous interface.。 b. At right, there are multi-live setting, pan/tilt, image setting, two-way audio, video record, snapshot button. 1.
a、 Please add your devices based on the quantity you have before selecting multi-live devices, red arrow area is for different cameras you have. b、 Red arrow directing area is for 1,4,9 windows. c、 Select the related camera, you could make snapshots, recording or settings. 2. PTZ and Preset Position. a. Up,down, left & right arrow is for controlling the pan/tilt, double arrows and ring arrow is used for cruising. b.
c、Click GO and will appear the choice of preset position, you can choose the position you’d like. 3. Resolution Selection Selection： a.
b. Frame rate have 30、25、20,total 3 modes you could choose.。 4. Graphic Adjustment You could choose flip vertical, flip horizontal, brightness adjusting and contrast. You could rest with clicking the default. 5.
a、 You could click related button to get such function upside. b、 After you make the snapshots, please click save button the red arrow direct. Then select the storage area on your computer. c、 Click record and then you will see a red point on the right up-side, that means it’s recording now. 6.
When mouse is using at the windows, there will appear the short-cut buttons, From left to right: Pause/Play；Record；Alarm stop；Wide &narrow screen switching. III.
Click the red arrow directing area, you will see the device information there. 1. Alarm Setting a、 Set the motion detection and voice alarm, pictures can be sent to mail box or FTP server. Besides, can record video when alarm. b、 On the menu, we also provide motion detection sensitivity adjustment and preset setting when alarm. c、 You also could choose daily schedule there. d、 After finish the setting, please store your settings then could works. mail Setting 2.
a、 Please enter write sender’ and receiver’s email in the proper area. Please add ; when have many email addresses there. b、 SMTP Server is the same as the sender’s email SMTP . c、 SMTP port is 25. d、 User name and password please use the sender’s information there. e、 After finishing entering, please save it to make the setting work. You could make a test to check whether it works or not. 3.
a、 Please enter right sever address for the FTP.在 FTP b、 FTP port is 21. c、 User name and password is the same as you use on FTP. d. Upload the menu and make it as your save menu. e. After the filling, please save it and then the setting works. You could make a test on it to check if it works. 4. Record Parameter a、 Click the recording and alarm route , you could change the rout there. b、 Recording quality edit box could change the quality of the video, please save it after the settings. 5.
a、 You could change the device name on the name edit box. b、 If your network support DHCP service, please click dynamic obtaining IP address, the camera will automatic obtaining the IP address. c、 IP address edit frame shows the current IP address if the device, you could modify it there.. d、 Subnet mask edit box shows the current device subnet mask, you could revise it there. e、 Default edit box shows the current gateway, you could revise it there f、 WEB port edit box shows the current device’s WEB.
a、 Click scan, and you will see the Wifi there, choose your own Wifi and connect it. b、 Choose the right Security Mode and WPA Algorithms and then you will see pass phrase and then enter the Wifi password, click apply and then works.
c. If disconnect, it shows red circle, when succeed, it shows green circle. d.All the settings upside need be the same as you set on your router, please check your acess point or the manual book of the router to check it or consult the web administrator. 7. DDNS Dynamic realm name is used as a static realm name to visit a dynamic one. When you access to ISP network, the device will get a temporary dynamic IP address,the dynamic real name will track the address .
Add other cameras and click the area the photos shows and enter the right IP Address or realm name, port, user name, password, and they save it. You could click the multi graphics there. 9. Camera Basic Status Show device info. 10.
Enable or disable PTZ function, preset position, adjust PTZ initial position or PTZ speed. 11. System Setting a、 Derive setting could help you make the backup file b、 Lead-in could choose backup file and recover it. c、 Recover the factory setting would empty any settings you have and come back to the original factory default. 12.
User could choose the time as the PC, you also could choose time zone, internet time and the adjustment. Click save to make it work. 13. System Log Check the system log. 14.
You could choose the operation language and operation window as youer choice 15. Modify Password Modify current password. 16.
a. Administrator could operate, add, cancel the user b. There have 3 authorities for this camera: Visitor, operator, administrator. 1.Visitor: Only watch couldn’t do other operations. 2.Operator：Only could Watch, control the PAN/TILT. 3. Administrator: Could whole control of your camera. 17. Firmware Upgrading User could choose right firmware to upgrade your camera. 18.
Click rebooting button and reboot the camera 19. Real eal--time Monitoring Click the real time monitoring and back to the video page.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) (2) This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
