User's Manual

ManualsBrandsNEXXT SOLUTIONS ManualsElectronicsXpyBell

2. Insert Batteries

(1) Unscrew the battery compartment screw

with spplied screw driver.

(2) Insert the batteries supplied. Make sure the

polarity is as indicated before inserting the

battery cartridge back to RVDP.

(3) After the batteries are inserted, the Push

Button illuminator will light up and ash,

indicating RVDP is ready for further setup.

3. Setup RVDP via App

(1) While the push button illuminator is ashing Red&Blue,

launch the app and tap to add device.

(2) Scan QR code to bring up the DID or enter the DID manually

(The DID sticker is located at the back of the RVDP )

(3) Enter name for your RVDP (maximum 20 characters).

(4) Enter default Security Code: 123456.

(5) Tap "Save" and follow in-app wizard to complete the setup.

QUICK START GUIDE

KIT CONTENT :

1. App Download and Installation

(1) Please download and install the "OMGuard HD” APP to your device.

SETUP THE VIDEO DOORPHONE

(3)

Reset

Device ID: DOXX-123456-ABCDE (On Sticker)

Wi-Fi Pairing Mode:

SSID: RVDP-XXXXXX

Default PW:12345678

(1)

(2)

RVDP

x 1

Wall-Bracket

x 1

DC Power Cable

x 1x 4

Battery

(Type AA)

Note:

For video recording,

BE SURE TO

use CLASS 10 memory card or above . Other kinds of memory card may cause

unexpected results and should be avoided.

Screw Pack

x 1

Quick Start Guide

Black

Red

HARDWARE OVERVIEW

Memory Card Slot

I/O Pin Connector

1. AC/DC: Power Input I/O *

2. O2/O1: Wet Contact I/O

3. B2/B1: Dry Contact I/O

4. B2/B1: Dry Contact I/O

Reset Button

Note:

On the back of the RVDP you will nd DID label containing

DID number, which you will need later on when resetting device.

Note: If the illuminator is not lighted,

press/hold the Reset Button for 5 seconds

until the illuminator lights up and ash.

2 5

*Power input jack can be safely connected with

AC/DC 9~36V power cable in any polarity

For iOS

For Android

1 2

3 4

DOXX-123456-ABCDE

HD Camera

Speaker

Doorbell Button

Microphone

Battery Compartment

Dry/Wet Contact Cable

x 3

Black

Summary of content (4 pages)

PAGE 1
QUICK START GUIDE 1. App Download and Installation (1) Please download and install the "OMGuard HD” APP to your device. KIT CONTENT : Battery (Type AA) Wall-Bracket RVDP SETUP THE VIDEO DOORPHONE DC Power Cable Black x1 Dry/Wet Contact Cable x4 x1 For iOS Red x1 Quick Start Guide Screw Pack Black Black Note: x3 x1 x1 For video recording, BE SURE TO use CLASS 10 memory card or above . Other kinds of memory card may cause unexpected results and should be avoided.
PAGE 2
DOORPHONE INSTALLATION ANSWERING A CALL Note: (A) Battery Power Option is being illusestred here, therefore if you wish to power the RVDP via existing doorbell wires or optional adaptor, please refer to owner's manual for more details. (B) Before installation begins, it is suggested to turn off the "Power Saving" mode so you can have continuous connection via the live-video while defining the installation location/height. Please refer to Power Saving Mode section of this document.
PAGE 3
POWER SAVING MODE ADDITIONAL WIRING DIAGRAMS (1) While in the device list section, tap A. Electronic Lock (2) Tap Live View - + to bring up edit option icons. to enter System Info (3) Select "Advanced" and enter default password: 123456. + (4) Scroll down to the Power Saving section and select desire power saving time. Note: It is suggested to set the Power Saving to 30 seconds to maximize battery power.
PAGE 4
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.