Assembly Instructions

Step 1
Unpack and place all parts on a clean non marring flat surface .
Step 2
Step 2.1: Place the Table Top (A) facedown, onto a clean, soft surface to avoid any scratches or damages to the
2.2
2.1
Step 3
Step 3.1: Affix Support Bar (D) to Leg Panels (B),(C) by using Bolts (
①
) Flat washer (
③
) and Allen Key (
m
).
You may need to push the Leg Panels (B),(C) outwards slightly to attach the Support bar (D).
Step 3.2: Secure the iron frame to the wooden table top by using Screws (②), flat washer (③) and Allen Key (
m
)
DO NOT FULLY TIGHTHEN THE BOLTS/SCREWS.
Step 2.1: Place the Table Top (A) facedown, onto a clean, soft surface to avoid any scratches or damages to the
product.
Step 2.2: Position the Leg Panel (B) into the Table Top (A) as shown in picture above.
Then affix Left Leg Panel (B) to Table Top (A) by using Bolt (①), Flat washer (③) and Allen Key (
m
).
Step 2.3: Repeat the same process 2.2 to affix Right Leg Panel (C) to Table Top (A).
DO NOT FULLY TIGHTHEN THE BOLTS
3.1
3.2
Page 4 of 6