User's Manual

2 3
MAIN UNIT
1. POWER BUTTON
2. SOURCE BUTTON
3. PAIRING BUTTON
4. VOL- BUTTON
5. VOL+ BUTTON
6. LCD DISPLAY
7. SKIP DN/TUN- BUTTON
8. SKIP UP/TUN+ BUTTON
9. STOP/CH- BUTTON
10. PLAY/PAUSE/CH+ BUTTON
11. MEM BUTTON
12. SPEAKERS
13. BLUETOOTH INDICATOR
14. USB PORT
15. SD/MMC CARD SLOT
16. FM TELESCOPIC ANTENNA
17. HANDLE
18. DC IN JACK
19. LINE IN JACK
20. BATTERY COMPARTMENT
POWER SUPPLY
 BATTERY OPERATION
1. Remove the battery compartment cover gently.
2. Install 4 x 'C' size batteries (UM-2 or equivalent) while observing the correct polarities.
3. Replace the battery compartment cover.
NOTE:
 The AC/DC adapter must be detached from the DC IN jack of the player for battery
operation.
 Leaking batteries may damage the battery cabinet and the player as a whole, so they
should be removed from the cabinet when becoming flat or when the player is not to
be played on batteries for some time.
 DC INPUT OPERATION
Plug the supplied adapter to the DC IN jack on the rear of the unit and to the main power.
BLUETOOTH OPERATING
This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device.
1. Power on the unit by pressing the POWER button, switch to BLUETOOTH mode by
pressing SOURCE repeatedly, “BT” shows on the display.
2. LED indicator rapid blinking while it is pairing.
3. Pair and connect to PH11 on the BLUETOOTH audio source device. If prompted for
passcode, enter “0000”.
4. Pairing successful (LED indicator lights solid blue), ready to stream music.
5. Press the PLAY/PAUSE/CH+ button to pause/resume the playback.
6. During playback, press the SKIP DN/TUN- button once to go back the beginning of the
current track, press the SKIP DN/TUN- button twice continuously to skip to the previous
track.
7. During playback, press the SKIPUP/TUN+ button to skip to the next track.
8. Press and hold the SKIP UP/TUN+ or SKIP DN/TUN- button to search through the current
track forward or backward. Release the SKIP UP/TUN+ or SKIP DN/TUN- button to
resume normal play
Note:
 Pairing mode is canceled about 1.5 minutes.
 The above are generic steps to pair a BLUETOOTH device, for more specific instructions
on BLUETOOTH connectivity for your device, please consult your manufacturer’s
manual.
 After the first connection, the unit will detect your last paired BLUETOOTH device and
connect to it automatically.
RE-CONNECT TO THE BLUETOOTH AUDIO SOURCE DEVICE
If the device is already paired with the PH11, but became unconnected even with both
Bluetooth devices turned on. You can re-connect them by following steps:
1. Press the PAIRING button to re-link the audio source device. The Bluetooth indicator will
blink for about 1.5 minutes for connecting.
2. Select PH11 on the audio source device for connecting. Bluetooth indicator will turn to
solid blue if the PH11 and the device have been re-connected successfully.
1
2
3
4
5
6 7
8
9
10
11
12 13 14 15 12
16 17
18 19 20