User's Manual

ManualsBrandsNgai Lik Electronics Enterprises ManualsElectronicsFM STEREO RADIO WITH BLUETOOTH/CD/USB/MP3/SD CARD/AUX IN PLAYER

2 3

LOCATION OF CONTROLS

1. HANDLE

2. FM TELESCOPIC ANTENNA

3. CD DOOR

4. VOLUME UP/DN CONTROL

KNOB

5. POWER BUTTON

6. MODE/PROG/MEM BUTTON

7. 10+/M- BUTTON

8. LCD DISPLAY

9. STOP/M+ BUTTON

10. PLAY/PAUSE/PAIR BUTTON

11. FUNCTION BUTTON

12. CD DOOR OPEN AREA

13. TUN+/- & NEXT/PREVIOUS

CONTROL KNOB

14. SPEAKERS

15. AUX IN JACK

16. BLUETOOTH INDICATOR

17. SD CARD SLOT

18. USB PORT

19. DC IN JACK

20. BATTERY COMPARTMENT

POWER SUPPLIED BY THE AC/DC ADAPTER

Plug the AC/DC adapter to the unit and the main power.

POWER SUPPLIED BY BATTERIES

The unit can be operated by batteries. Follow the below steps to install the batteries:

1. Remove the battery compartment cover gently.

2. Install 8 x 'C' size batteries (UM-2 or equivalent) taking care that the correct polarities are

observed.

3. Replace the battery compartment cover.

NOTE:

 The AC/DC adapter must be removed for the battery operation.

 To avoid damage which may result from leaking batteries, remove the batteries when

they become weak or when the unit is not to be used for long period of time.

PLAY THE RADIO

1. Press the POWER button to turn the unit on.

2. Press the FUNCTION button several times to enter the FM mode.

3. Rotate the TUN+/- control knob briefly to fine tune the radio station. Rotate and hold the

TUN+/- control knob clockwise/counter-clockwise for a few seconds to auto search radio

station forward or backward respectively (When an available station will be found, the unit

will broadcast it immediately and the searching will be stopped).

4. The external FM TELESCOPIC ANTENNA is directional. When receiving FM broadcasts,

fully extend the FM TELESCOPIC ANTENNA and position for the best reception.

5. Rotate the VOLUME UP/DN control knob to adjust the volume level.

6. Press the POWER button to turn off the unit.

STORING YOUR FAVORITE RADIO STATION

1. During playback, press and hold the MODE/PROG/MEM button for storing the current

station to the unit’s memory, the memory cell number flashes on the screen.

2. Press the STOP/M+ or 10+/M- button repeatedly to select the corresponding memory cell

among P01-P10 for storing the station.

3. Confirm your selection by pressing the MODE/PROG/MEM button.

4. Repeat the above steps for storing other stations.

5. During radio playback, press the STOP/M+ or 10+/M- button repeatedly to recall the

stored stations.

1 2 3

4 5 6 7 8 9 10 11 12 13

14 15 17 18 14

20 19