User guide

ManualsBrandsNGM-Mobile Manualscomputers & electronicsAction

Set up

Installing the USIM cards

The USIM card stores information as your personal phone

number, PIN code, carrier services numbers, contacts and other

important details. To access the USIM slots, turn off the phone,

take off the back cover by lifting it up from its lower part and

extract the battery. The slots for the USIM cards are placed into

the battery tray. Insert your USIM cards by sliding them in with

their golden contacts facing downwards. USIM1 supports

WCDMA.

Installing the memory card

In order to use all functions of NGM WEMOVE ACTION, it is

advisable to install a micro-SD card: it must be inserted in the

back side of the phone, after powering it off and removing the

back cover. A dedicated slot fort the memory card is placed

right next to the SIM2 slot; Unlock the micro-SD grid by pushing

it into the “Open” direction. Slide in the memory card so that

the gold contacts are turned downwards. Close the grid and

push it into the “Lock” position.

USIM2: GSM

USIM1: UMTS

or GSM

MicroSD

Summary of content (10 pages)

PAGE 1
Set up Installing the memory card Installing the USIM cards In order to use all functions of NGM WEMOVE ACTION, it is advisable to install a micro-SD card: it must be inserted in the back side of the phone, after powering it off and removing the back cover. A dedicated slot fort the memory card is placed right next to the SIM2 slot; Unlock the micro-SD grid by pushing it into the “Open” direction. Slide in the memory card so that the gold contacts are turned downwards.
PAGE 2
Inserting the battery Charging the battery Your device is provided with a lithium-ion battery and is designed to be used exclusively with original NGM batteries and chargers. The battery must be inserted into the backside of the phone (see illustration below) with the battery contacts facing the contacts in the battery tray. When done, put the hind cover back into position as shown in the following illustrations. Please charge the battery completely before starting to use the device.
PAGE 3
Eyelets for phone strap On/off and Standby key Receiver Earphones connector Camera Capacitive touch screen Volume “ +” and “–“ Micro USB Connector Home Find Contextual Menu Back Microphone Speaker
PAGE 4
Turn on, turn off and standby The main screen USIM signal intensity Press and hold the Power key to turn the phone on. Press and hold the same key and confirm your intention to turn off the phone. A quick pressure of the on/off key sets the phone on standby-mode (screen off) or to go back to the standby screen (see below). Battery level Notification panel Main screen page indicator bar Drag the bar to the right in order to unlock the screen and open the main screen.
PAGE 5
The Main Menu Notification panel selectively in any moment. In this menu you can moreover assign custom colors to each USIM card and define the card (or “always ask”) for your voice calls, vido calls or data connections. Managing calls Voice calls SCROLL Use the touch screen by touching, pressing, sliding your finger over it. Select an application from the main menu or scroll the main menu pages right and left to find the desired one.
PAGE 6
Managing contacts Note: you can use *mid,*wav or *mp3 files as ringtones. Add a new contact From the main screen/menu, select the Contacts icon. Select the icon with the “+” on it. Select the storage (Phone, USIM1 or USIM2). Insert Name, Number and eventual other details (if saving on the phone memory). Confirm by selecting Save. Screen lock and shortcuts Add a new contact from the call history From the main screen, select Call Menu and the Call log Tab.
PAGE 7
Connectivity The operation system requires an active data connection. If data traffic is not included in your phone contract, it could imply extra costs. In that case it is advisable to configure the internet access through WiFi. The activation/deactivation of the data traffic on the USIM is in Settings (Communication Tab) > SIM Management > Data Connection. Connect to the Internet using WLAN Connect to the wireless net using the Wi-Fi function.
PAGE 8
Rapid access Notification panel Open the notification panel by touching the upper area containing the battery and signal-intensity icons and drag it downwards. To hide the panel, push it up again starting from the bottom. From the panel you have rapid access to a list of notifications from the USIM or the System and to the control panel with 12 management and settings- widgets by selecting Toolkits.
PAGE 9
Certifications Declaration of conformity (R&TTE) We, NGM Italia Declare under our sole responsibility that the product identified as GSM/WCDMA/Wi-Fi Mobile Phone: NGM WEMOVE ACTION Conforms to the following standards and specifications: Health Safety EMC Radio EN 50360, EN 62209-1 EN 60950-1+A11 EN 301 489-1/-7/-17 EN 301 511 EN 300 328 We declare that all the series of fundamental radio test have been conducted and that the aforesaid product meets all the essential requirements of the Directive 1999/5/EC
PAGE 10
designated product is in compliance with the essential requirements and other relevant provisions of the R&TTE Directive (European Radio & Terminal Telecommunications Equipment)1999/5/EC [1] These controls have been international guidelines on controls. made according to http://www.who.int/mediacentre/factsheets/fs193/en/index.