Operation Manual

ManualsBrandsNGM ManualsSmartphoneExplorer

Setup

InstallingtheUSIMcards

The USIM card stores information as your personal phone

number,PINcode,carrierservicesnumbers,contactsandother

importantdetails.ToaccesstheUSIMslots,turnoffthephone,

takeoffthebackcoverbyunscrewingthetwobigscrewsonthe

coverandliftingit up

andextractthebattery. InsertUSIM2 by

sliding it with its golden contacts facing downwards. USIM1

supports WCDMA, it should be installed after installing the

memorycardsinceitsslotcontainsthemicro‐SDslot.Openthe

metallic grid by pushing it into the “open” position. Insert the

USIMcard 

intothemetallicgridsothatthemetalliccontactwill

be turned downwards when you close the grid. Push the grid

intothe“Lock”directiontocloseit.

Installingthememorycard



Inorder touseallfunctions ofNGMExplorer,itisadvisableto

install

a micro‐SD card: it must be inserted in the back side of

the phone, after powering it off and re moving the battery. A

dedicatedslotfortthememorycardisplacedundertheUSIM1‐

slot. Unlock the micro‐SD grid by pushing it into the “Open”

direction. Slide in the

 memory card into the opened metallic

grid so that the gold contacts will be facing downwards when

you close the grid. Close the grid and push it into the “Lock”

position.







micro

USIM2:GSM

USIM1:UMTSorGSM

Summary of content (10 pages)

PAGE 1
Set up Installing the memory card Installing the USIM cards In order to use all functions of NGM Explorer, it is advisable to install a micro‐SD card: it must be inserted in the back side of the phone, after powering it off and removing the battery. A dedicated slot fort the memory card is placed under the USIM1‐ slot. Unlock the micro‐SD grid by pushing it into the “Open” direction.
PAGE 2
Inserting the battery Charging the battery Your device is provided with a lithium‐ion battery and is designed to be used exclusively with original NGM batteries and chargers. The battery must be inserted into the backside of the phone (see illustration below) with the battery contacts facing the contacts in the battery tray. When done, put the hind cover back into position and close the screws by turning them clockwise with the dedicated screwdriver.
PAGE 3
Micro USB Connector Brightness and proximity sensor Earphones connector Receiver Front camera Signal LED Eye for safety‐strap On/Off and Standby key Capacitive touch screen Speaker Camera Flash Secondary Microphone Volume “ +” and “–“ Find Back Home Side Key Contextual Menu Microphone Call key End key
PAGE 4
Turn on, turn off and standby The main screen USIM signal intensity Press and hold the Power key to turn the phone on. Press and hold the same key and confirm your intention to turn off the phone. A quick pressure of the on/off key sets the phone on standby‐mode (screen off) or to go back to the standby screen (see below). Battery level Notification panel Main screen page indicator bar Drag the bar to the right in order to unlock the screen and open the main screen.
PAGE 5
The Main Menu Notification panel Managing the two USIM cards From the main menu, select Settings > SIM Management. Select the “USIM1” and/or “USIM2” checkboxes to activate/deactivate the USIM cards selectively in any moment. Select Select SIM when bootup if you want to choose wheter to activate each SIM or not at every bootup. Managing calls SCROLL Home Use the touch screen by touching, pressing, sliding your finger over it.
PAGE 6
Managing contacts Screen lock and shortcuts Add a new contact From the main screen/menu, select the Contacts icon. Select the contextual menu and the New Contact icon. Insert Name, Number and eventual other details (if saving on the phone memory). Confirm by selecting Done. From the main menu, select Settings > Security > Set up screen lock. Select the desired unlocking mode (None, Pattern, PIN or Password) and confirm.
PAGE 7
Connectivity The operation system requires an active data connection. If data traffic is not included in your phone contract, it could imply extra costs. In that case it is advisable to configure the internet access through WiFi. The activation/deactivation of the data traffic on the USIM is in Settings > SIM Management > Data Connection. Connect to the Internet using Wi‐Fi Connect to the wireless net using the Wi‐Fi function.
PAGE 8
Rapid access Notification panel Open the notification panel by touching the upper area containing the battery and signal‐intensity icons and drag it downwards. To hide the panel, push it up again starting from the bottom. From the panel you have rapid access to a list of notifications from the USIM or the System and in the upper part, to maximum 5 management widgets at once; scroll the widget‐bar left and right to visualize other ones. Display settings: Brightness, Timeout, Auto rotation.
PAGE 9
NGM Italia S.r.l. Via L.
PAGE 10
designated product is in compliance with the essential requirements and other relevant provisions of the R&TTE ‐ Directive (European Radio & Terminal Telecommunications Equipment)1999/5/EC [1] These controls have been international guidelines on controls. made according to http://www.who.int/mediacentre/factsheets/fs193/en/index.