Operation Manual

User Manual
10
Installing the Memory card
Since the mobile phone does not have enough storage space, in order to use some functions which need more
memory, you will need to install a memory card (this mobile phone use T-FLASH card).
The MicroSD card must be inserted into the back side of the phone, after removing the back cover. A
dedicated slot for the memory card is placed beside the SIM cards slots (see below); unlock the memory card
slot by pushing the metal harness toward the ―Unlock‖ position, then insert the microSD card with the golden
contacts facing downwards. Then close and lock the harness.
Note: as the T-Flash card is a small object, keep it out of children’s reach to prevent children from swallowing it!
Memory card installation scheme
Charging the battery
The new battery will reach the optimal efficiency when it has undergone several continuous complete charges and
discharges. When the battery is low, charge it in time. Over-discharge can damage the battery.
Connect the charger to the AC power supply and to the phone USB connector, at the bottom of the phone. During
charging, the battery capacity icon on the screen will report the charging process. After the battery is full, the
battery icon will be full. Cut the connection of the charger with the AC power supply and then the connection of
the charger with the mobile phone.
Note: use only the provided USB cable for recharging the device. Charge the battery indoors in a dry and
favourable environment. It's normal for the battery to get slightly warm during the charging process.
Warning: use only original accessories to charge the battery. The use of other accessories may damage your
mobile phone and cause risks!
Micro SD