Operation Manual

User Manual
14
Stand-by screen
Basic operations
Power on
Press the On/Off key for a few seconds to start the mobile phone.
From main menu, select Settings > Dual SIM settings to choose between: Dual SIM open, Only SIM1 open,
Only SIM2 open or Flight mode. The defaulted mode is Dual SIM Open, if both SIM cards are inserted.
If a SIM card is inserted, the mobile phone will automatically check the SIM card availability and then the
following informations will be show the on the display by sequence:
1. ―Input phone password‖— if you have set a password for the phone.
2. ―Input PIN‖ —if you have set the telephone to ask for the SIM card password.
3. ―No service‖— indicates failure to register; the phone cannot make any calls.
4. ―Emergency calls only‖— indicates that the phone has registered to other network and can only make
emergency calls to 112.
5. ―Searching‖— the mobile phone is searching for a network.
6. ―Operator name‖— indicates network successfully registered.
Note: if you do not know your PIN code, please contact the network service provider. The mobile default
password code is ―1122‖.
Menu
Battery
Notifications
Signal strenght
Messages
Phonebook
Virtual keypad
Widget
Bar