Operation Manual

User Manual
28
Phone settings
Time and date:
With this function, you can set your time zone reference city, time and date format and the time of a specific
foreign location.
 Set Home City: you can set your time zone reference city.
 Set Time/Date: you can set the current time and date, and activate/deactivate daylight saving.
 Set Format: you can set the format of date and time visualization.
 Update with time zone: to set the mobile phone to automatically update time and date according to the
current time zone, choose ―On‖. Auto update of time and date will not affect the alarm clock, calendar or
alarm clock memo setting time, which will be subject to the time and date when created.
Note: if the battery is taken from the mobile phone or the battery is used up for long time, when switching on the
mobile phone after reinstalling the battery or charging the battery, you will need to reset time and date.
Special note: please disable the automatic update in all areas where the cell phone use is forbidden.
Schedule Power on/off: you can schedule the Power on/off time by using the 4 timing slots.
Language: you can select the desired language for the phone's menus between the choices.
Preferred writing language: defines which language is available in XT9 Settings.
Display:
 Wallpaper: you can choose between 8 system-defined wallpapers or insert a user-defined one.
 Screen saver:
o
Settings: enable/disable the screen saver, and fix the waiting time (5 sec., 15 sec., 30 sec. or 1
minute).
o
Select: eight System screen savers are available as well as a User defined screen saver
(previously
saved in Phone or Memory card).
 Power on picture: choose the system-defined animation or insert a user-defined one.
 Power off picture: choose the system-defined animation or insert a user-defined one.
 Show date and time: to visualize (or not) the date and time on the stand-by display.
 Clock type: you can choose between digital and analog clock.
 Show owner number: You can turn on or off the display of the owner number separately for the two SIM
Cards.
Greeting text: to visualize (or not) a greeting message whenever turning on the phone.
Auto update time:
toggle on/off the automatic update of date and time. This updating doesn’t affect alarm
clock or calendar. The update must be supported by network operator.
UART settings: enable the UART settings on one of the two SIM cards.
LCD Backlight: you can adjust the LCD backlight brightness and timing (5 sec. ~ 1 minute).
Dual SIM settings
At any time you can set the desired mode on the mobile phone, according to the following options:
 Dual SIM open
 Only SIM1 open
 Only SIM2 open
 Flight mode