Operation Manual

31
31
User Manual
menu, select “Trusted Numbers” and insert up to 5 phone numbers to receive the message. After completing
configuration, the phone shall accept remote commands from one of the trusted numbers.
1) Call forwarding
If the user wants to forward all the incoming calls to another number, he can send to VAN GOGH (with remote
control enabled) one SMS containing the following text:
*#CALLFWD*#destination number, where “destination number” is the number where the user wants to receive
the forwarded calls.
Example:
- if the VAN GOGH number with remote control enabled is [phone];
- if the phone number to remotely control the VAN GOGH is [phone] (trusted number);
- if the phone number where you want to forward the calls is [phone].
The operations sequence shall be:
a) [phone] send one SMS to [phone] with the content:
*#CALLFWD*#2222222222.
b) [phone] receive one SMS from [phone] and automatically set the forwarding to
[phone].
c) all the incoming calls to [phone] shall be forwarded to [phone].
Note: the SMS content is “case insensitive”, so it may be indifferently written with capital letters, lower-case
letters or a combination of the two.
2) Remote shutdown (and activate the phone password at power on)
If the user wants to remotely shut down the phone, he can send to VAN GOGH (with remote control enabled) one
SMS containing the following text:
*#SHUTDOWN*#
Example:
- if the VAN GOGH number with remote control enabled is [phone];
- if the phone number to remotely control the VAN GOGH is [phone] (trusted number).
The operations sequence shall be:
a) [phone] send one SMS to [phone] with the content: *#SHUTDOWN*#
b) [phone] receive one SMS from [phone] and automatically shut down.
c) the phone password is automatically activated, so that it will require the use of the password at the next start-up.
If the password is correctly inserted, the phone shall starts regularly, and won’t require the use of the password
anymore (except for the case of the user that choose this particular setting).
Note: the SMS content is “case insensitive”, so it may be indifferently written with capital letters, lower-case
letters or a combination of the two.
3) Activate the answering machine
If the user wants to record all the incoming calls on the answering machine, he can send to VAN GOGH (with remote
control enabled) one SMS containing the following text:
*#ANSW*#
Example:
- if the VAN GOGH number with remote control enabled is [phone];
- if the phone number to remotely control the VAN GOGH is [phone] (trusted number).
The operations sequence shall be:
d) [phone] send one SMS to [phone] with the content: *#ANSW*#.
e) [phone] receive one SMS from [phone] and automatically activate the answering machine for