Instructions for Use
Table Of Contents
- Content
- [Customer]
- [Instructions for use]
- [Installation]
- 1.Installation Steps
- 1>How to find the power cord of the car ?
- 2>How to find the ground wire of the car (negative
- 3>How to find the horn line of the car?
- 4>How to test whether the unit work properly?
- 5>How to connect Bluetooth?
- 6>How to fix the unit ?
- 7>How to install the navigation antenna ?
- 8>The default factory mode password
- 9>The default Bluetooth Pin Code
- 2.Schematic diagram of reversing camera wiring
- 3.Fixed machine
- 1.Installation Steps
- [Introduction to basic functions]
- [Simple Trouble shooting]
- 1>Unable to boot normally
- 2> Automatic shut-down
- 3> Having noise
- 4> Remote control cannot be used
- 5> Settings con not be saved (no memory)
- 6> Car audio with Bluetooth but if can't work
- 7>The product smoke has proved that the internal c
- 8>How to adjust the sound, where is the equalizer
- 9>Support no image of reversing camera
- 10> USB flash disk can not be played, the card wit
- 11> FM does not receive the program
- 12>How to install
- 13>How to remove the original car's radio
- 14>Install it without reading the card or USB flas
- 15> Just installed no sound
- 16> After a while there is no sound
- 17>Machine reset
- 18>The other party cannot hear the voice of the Bl
- 19>The clock is still displayed after the product
16
1.Touch to shift screen to MAIN MENU.
2.Touch to hide the shortcut menu button area. Touch the top and pull-
down of the screen and wake up the shortcut menu button.
3.Touch to display all the programs running in the background, where
you can choose to close the programs running in the background.
4.Touch to shift screen to return to the previous interface.
5.WIFI: Touch to open the WIFI connection interface, search for the WIFI
name you need, then click on the connection.
6.Data usage: Touch to open the monitoring interface for data usage.
You can view the usage of data traffic in the corresponding date.
7.More: you can turn on or off the Airplane mode, setting Tethering &
portable hot spot.
8.Display: Touch to open Display interface. You can setting the Wallpaper
and Font size, Turn on or turn off the video output function of the machine.
9.Sound & notification: Touch to open Sound & notification interface.
The user can set the alarm clock, the bell and the key tone of the system.
10.Apps: Touch to open Apps interface. You can separately view that all
the apps that have been installed on the machine.
11.Storage & USB : Touch to open Storage & USB interface. You can see