Instructions for Use
Table Of Contents
- Content
- [Customer]
- [Instructions for use]
- [Installation]
- 1.Installation Steps
- 1>How to find the power cord of the car ?
- 2>How to find the ground wire of the car (negative
- 3>How to find the horn line of the car?
- 4>How to test whether the unit work properly?
- 5>How to connect Bluetooth?
- 6>How to fix the unit ?
- 7>How to install the navigation antenna ?
- 8>The default factory mode password
- 9>The default Bluetooth Pin Code
- 2.Schematic diagram of reversing camera wiring
- 3.Fixed machine
- 1.Installation Steps
- [Introduction to basic functions]
- [Simple Trouble shooting]
- 1>Unable to boot normally
- 2> Automatic shut-down
- 3> Having noise
- 4> Remote control cannot be used
- 5> Settings con not be saved (no memory)
- 6> Car audio with Bluetooth but if can't work
- 7>The product smoke has proved that the internal c
- 8>How to adjust the sound, where is the equalizer
- 9>Support no image of reversing camera
- 10> USB flash disk can not be played, the card wit
- 11> FM does not receive the program
- 12>How to install
- 13>How to remove the original car's radio
- 14>Install it without reading the card or USB flas
- 15> Just installed no sound
- 16> After a while there is no sound
- 17>Machine reset
- 18>The other party cannot hear the voice of the Bl
- 19>The clock is still displayed after the product
21
[Navigation]
1.Touch to shift screen to MAIN MENU.
2.Touch to hide the shortcut menu button area. Touch the top and pull-
down of the screen and wake up the shortcut menu button.
3.Touch to display all the programs running in the background, where
you can choose to close the programs running in the background
4.Touch to shift screen to return to the previous interface.
5.After touching the hook, boot automatically run navigation.
6.If multiple navigation software is installed in the system, After touching
the hook, the system will always ask which navigation software should be
opened each time the navigation is started.
7.A list of navigation software installed in the system, the user can select
one of the navigation software, when the navigation is turned on, the system
will automatically run the navigation software.