Instructions for Use
Table Of Contents
- Content
- [Customer]
- [Instructions for use]
- [Installation]
- 1.Installation Steps
- 1>How to find the power cord of the car ?
- 2>How to find the ground wire of the car (negative
- 3>How to find the horn line of the car?
- 4>How to test whether the unit work properly?
- 5>How to connect Bluetooth?
- 6>How to fix the unit ?
- 7>How to install the navigation antenna ?
- 8>The default factory mode password
- 9>The default Bluetooth Pin Code
- 2.Schematic diagram of reversing camera wiring
- 3.Fixed machine
- 1.Installation Steps
- [Introduction to basic functions]
- [Simple Trouble shooting]
- 1>Unable to boot normally
- 2> Automatic shut-down
- 3> Having noise
- 4> Remote control cannot be used
- 5> Settings con not be saved (no memory)
- 6> Car audio with Bluetooth but if can't work
- 7>The product smoke has proved that the internal c
- 8>How to adjust the sound, where is the equalizer
- 9>Support no image of reversing camera
- 10> USB flash disk can not be played, the card wit
- 11> FM does not receive the program
- 12>How to install
- 13>How to remove the original car's radio
- 14>Install it without reading the card or USB flas
- 15> Just installed no sound
- 16> After a while there is no sound
- 17>Machine reset
- 18>The other party cannot hear the voice of the Bl
- 19>The clock is still displayed after the product
28
37.Device PIN: Touch to change the default Bluetooth device PIN. The
default Bluetooth device name is: 0000/1234.
38.Auto answer: Touch to turn on or turn off the Auto answer operation.
When this operation is turn on, and the phone calls in, the phone will be
automatically answered
39.Auto connect: Touch to turn on or turn off the Auto connect
operation. When this operation is turn on, and the device is disconnected,
the previously connected mobile will be automatically connected to the
device within the range of distance. When this function is closed, each device
needs to be manually connected after disconnection.
40.Power: Touch to turn on or turn off the BT Power. When BT Power is
turn off, the phone will not be able to search for the Bluetooth device.
[Local Music]
1.Touch to shift screen to MAIN MENU.
2.Touch to shift screen to return to the previous interface.
3. Touch to mute all sound output, touch again to unmute.