Instructions for Use
Table Of Contents
- Content
- [Customer]
- [Instructions for use]
- [Installation]
- 1.Installation Steps
- 1>How to find the power cord of the car ?
- 2>How to find the ground wire of the car (negative
- 3>How to find the horn line of the car?
- 4>How to test whether the unit work properly?
- 5>How to connect Bluetooth?
- 6>How to fix the unit ?
- 7>How to install the navigation antenna ?
- 8>The default factory mode password
- 9>The default Bluetooth Pin Code
- 2.Schematic diagram of reversing camera wiring
- 3.Fixed machine
- 1.Installation Steps
- [Introduction to basic functions]
- [Simple Trouble shooting]
- 1>Unable to boot normally
- 2> Automatic shut-down
- 3> Having noise
- 4> Remote control cannot be used
- 5> Settings con not be saved (no memory)
- 6> Car audio with Bluetooth but if can't work
- 7>The product smoke has proved that the internal c
- 8>How to adjust the sound, where is the equalizer
- 9>Support no image of reversing camera
- 10> USB flash disk can not be played, the card wit
- 11> FM does not receive the program
- 12>How to install
- 13>How to remove the original car's radio
- 14>Install it without reading the card or USB flas
- 15> Just installed no sound
- 16> After a while there is no sound
- 17>Machine reset
- 18>The other party cannot hear the voice of the Bl
- 19>The clock is still displayed after the product
34
Open the TIMA application and follow the prompts on the phone to
complete the connection.
Note: If you do not find the developer option in the phone settings,
please go to About phone and click the version number 7 times in a row. The
system will prompt you: You are already in developer mode.
[IPHONELINK menu]
1.Open mobile phone hot spot and select your hot spot in the list.
2.Slide up your iPhone, click the Air Play mirror.
3.Scan QR code and Download TIMAAPP, install TIMAAPP.
[Screen floating bar]
Go to the settings interface, other settings, find the Float Bar and choose
to tick.
1.Float Bar can appear in any interface, touch to open the shortcut menu.
2.Touch to shift screen to return to the previous interface.
3.Touch to reduce the volume.
4.Touch to increase the volume.
5.Touch to shift screen to MAIN MENU.
6.Touch to shutdown the machine.
[Panel button control light]
1.Turn on the settings.
2.Open the factory settings and enter the password, the password is:
8888 (different products, different passwords).
3.Find the button light setting to adjust, or connect the orange ILL wire