Four Classic Three Loudspeakers Setup Guide
NHT's Classic Series represents our best efforts to date in passive loudspeaker design. Classic starts with the design fundamentals that have made NHT's reputation for accuracy and high performance, and adds new driver and cabinet technologies which reduce distortion and improve dispersion. The benefit to you is a more articulate, more musical listening experience.
You will also notice an unusually shaped piece of foam with an adhesive backing. The purpose of this foam is to reduce unwanted reflections caused by interaction between the tweeter and midrange drivers. To get the best performance from the Three or Four, install this foam part. Fig. 3 demonstrates where to mount the foam part. Here are some tips for maximizing the performance of your speaker system: Position the speaker 1.5 times as far away from you as they are from each other. (Fig. 4) Fig. 4 Fig.
Place the center channel speaker right above or below the TV Place the rear speakers in an equilateral triangle with the listening position, at least 5' apart. Rear speakers should be at the same height, or higher than, the front channels. Obviously many rooms will not allow ideal placement. As a general rule, try to keep the rear channel speakers equidistant from the center of the listening area.
S p e c i f i c a t i o n s All Classic Series products are sonically matched for seamless integration into multichannel systems.
