L5 On-Wall Loudspeakers OWNER’S MANUAL Now Hear This 6400 Goodyear Road Benicia, CA 94510 800-NHT-9993
Specifications L5 on wall Loudspeaker System Type: 3-way acoustic suspension Driver Complement: (2) 5.25” laminated cone woofers 3” paper cone midrange 1” fluid cooled aluminum dome tweeter Crossover: 450KHz, 2.4 KHz 12dB/octave high-pass and 12dB/octave low-pass Response: 65Hz - 30KHz, +/-3dB Sensitivity: 86dB (2.83V at 1M) Impedance: 6 ohms nominal Recommended Power: 50W/ch minimum, 150W/ch maximum Inputs: 5-way binding posts Weight: 18 lbs. each Dimensions: 21.8” H x 7.7” W x 5.
! Placement The NHT L5 on-wall loudspeaker is designed for on-wall installation into standard 2” x 4” wood studs or joists. Installation in outdoor locations or in moisture-prone interior environments such as indoor swimming pools or saunas is not recommended. Spend some time considering speaker placement prior to installing the NHT L5 on- fig.1 wall loudspeaker.
! Mounting Caution: On-wall loudspeakers should be installed by an experienced and licensed custom installation professional. Be sure that the installer possesses sufficient skill, the proper tools, knowledge of local fire and building codes, and a familiarity with the structure of the building (especially wall and/or ceiling materials, layouts, electrical and plumbing lines, etc.). The NHT L5 on-wall loudspeaker is designed to be conveniently mounted on a wall (or ceiling).
! Connections Before connecting your L5 loudspeakers to your system, turn off the power to your amplifier / receiver to avoid damaging the components or the speakers. If the L5 speaker is to be used with other NHT Evolution products, refer to the Evolution Owners Manual & Setup Guide for connection methods. First, please take a look at the five-way binding posts on the back of your speakers. They'll accept raw wire, banana plugs or spade plugs.
! What is "Virtual" Focused Image Geometry? NHT's hallmark for many years was technology called Focused Image Geometry (F.I.G.). This is achieved by angling the front baffle of the loudspeaker cabinet. The angled cabinet focused the mid-range and high frequencies into the listening room and away from room boundaries increasing the ratio of direct to reflected sound. This resulted in loudspeakers systems universally praised for their imaging and detail over a wide listening area.
Limited Warranty Valid Only in the U.S.A.
