Operation Manual

Analog Inputs
46 ViewCast
Output tab
Use the following table to configure the output analog input settings for an Adaptive Apple encoder.
Note: The choices in the drop-down lists may vary.
Figure 36. Output tab
To configure output settings:
1.
Select Stream to Network Host.
CAUTION! Simultaneously publishing to server and file system increases CPU usage.
2.
Select the Host Address.
Note: When you select ftp://, the Passive FTP Mode displays. Select this field to use passive
FTP mode or clear this field to use active FTP mode.
3.
Enter the address in the next field.
4.
Indicate the maximum HTTP Cache by dragging the slider for the number of files to maintain.
Note: The Stream Path that displays is a combination of the Host Address, Subfolder, and
Filename.
5.
Select Create unique folder to create a file that the system does not overwrite.
Note: The format is Subfolder_YYMMDD_HHMMSS.
6.
Enter the name of the Subfolder used in the network destination and/or the local file system
full filename.
7.
Enter the name of the variant playlist file in the Filename field.
8.
Enter the Number of Segments Per Folder.
9.
Select Stream to File System to enable archiving content to the file system.
10.
Accept the default location that displays in the Folder field or choose your own location for
the file. To choose your own personal location, select the link (horizontal ellipses or … ) to
the right of the Folder field to display the options.