Operation Manual

103
Output Selection
Connection
Parameters
TPG
Configuration
Parameters
Output Selection
Connection
Parameters
TPG
Configuration
Parameters
The configuration interface is divided into two areas:
 TPG Configuration Parameters, described in this section.
 Output Selection Connection Parameters, described in the Destination Selection
section of the Connections Tab chapter.
The TPG Configuration Parameters are:
 Port Name: All B264 ports have a user-defined name, to facilitate routing. Enter any
suitable name.
 Mode: controls the type of MPEG-2 transport packets generated. The options are:
o Disabled: TPG is disabled. No packets are being generated.
o NULL Packets: TPG is generating NULL packets. If you select this option, the
PID parameter becomes read-only with the value 1FFF.
o Ramp48 Packets: TPG is generating packets with a “Ramp48 Payload”. A
“Ramp48 Payload” is composed of the bytes 0x48, 0x49, 0x4A, …, 0xFF.
Generated packets have the Payload bit set, no Adaptation Field, and a valid