Operation Manual

31
 Dual Channel encoders: support for 1 or 2 audio stereo pairs per encoder channel, as
follows:
o First stereo pair:
 MPEG-1 Layer II, AAC-LC or Dolby Passthrough support
 Valid inputs: analog unbalanced audio, SDI embedded (SDI signals only)
o Second stereo pair (only available for SDI inputs):
 MPEG-1 Layer II support only
 Valid input: SDI embedded
 Dual Channel encoders can be configured to have one encoder channel with 3 audio
stereo pairs, and another encoder channel with 1 audio stereo pair, as follows:
o Encoder with 1 stereo pair:
 MPEG-1 Layer II, AAC-LC or Dolby Passthrough support
 Valid inputs: analog unbalanced audio, SDI embedded (SDI signals only)
o Encoder with 3 stereo pairs:
 First stereo pair:
 MPEG-1 Layer II, AAC-LC or Dolby Passthrough support
 Valid inputs: analog unbalanced audio, SDI embedded (SDI
signals only)
 Second stereo pair (only available for SDI inputs):
 MPEG-1 Layer II support only
 Valid input: SDI embedded
 Third stereo pair (only available for SDI inputs):
 MPEG-1 Layer II support only
 Valid input: SDI embedded
 Dual Channel encoders with combined audio: support for up to 4 audio stereo pairs per
board, as follows:
o First stereo pair:
 MPEG-1 Layer II, AAC-LC or Dolby Passthrough support
 Valid inputs: analog unbalanced audio, SDI embedded (SDI signals only)
o Second stereo pair:
 MPEG-1 Layer II, AAC-LC or Dolby Passthrough support
 Valid inputs: second analog unbalanced audio, SDI embedded (SDI
signals only)
o Third stereo pair (only available for SDI inputs):
 MPEG-1 Layer II support only
 Valid input: SDI embedded
o Fourth stereo pair (only available for SDI inputs):
 MPEG-1 Layer II support only
 Valid input: SDI embedded
Encoder Basic Configuration Tab
The Encoder Basic Configuration Tab, shown below, is divided into three general areas:
 General Configuration: generic configuration parameters.