Operation Manual

If Direct HTTP Streaming is selected in the Encoder Connections Tab, three indicators are added

to the status area:

 IP Output Rate: This indicator reports the aggregate average bit rate to all connected

clients (so it can be higher than the transport rate).

 Connections: This indicator reports the number of clients currently connected to this

encoder.

 Dropped Packets: This indicator reports the number of transport packets dropped over

the current connections. Once a connection terminates, the dropped packet count for that

connection is reset.

If RTMP is selected in the Encoder Connections Tab, five indicators are added to the status area:

 IP Output Rate: this field reports the average bit rate transferred to the server. It will be

lower than the transport rate due to the lower container overhead used by RTMP. It is