Operation Manual

Ethernet Port 1 Ethernet Port 2

The indicators can have the following values:

 OK: The IP Output is operating normally (either streaming or ready to stream).

 No Response: The IP Output is configured for unicast operation, but it does not have a

destination MAC address. If there is a connection to this output, Dashboard™ Card State

and the Status LED will be red.

 Overflow: The IP Output is configured for NULL Padding with a manual rate, and the

connected bitstream(s) exceed that configured manual rate. If this alarm is asserted,

packets are being dropped. The Dashboard™ Card State and the Status LED will be red.

 No Response: The IP Output is configured for unicast operation, and the destination

stopped responding to ARP. The IP Output is using an old cached MAC address. If

there is a connection to this output, the Dashboard™ Card State will be yellow (but

packets are being transmitted).

 Disabled: The IP Output has been disabled (by setting Enable to No).