Operation Manual

The Established Connections Table

As connections are established (either in the Connections tab, or as part of the source or output

configuration), they are added to the Current Connections table. Regardless of how they got

added, the connections can be managed using the functions in this table. A sample is depicted

below.

The following columns are available in this table:

 Source Port: this column indicates the physical port of the connection. The possible

values are Encoder 1, Encoder 2, TPG 1 and TPG 2.

 Source Name: this column contains the user-defined name for the source.

 Output Port: this column indicates the physical output port for the connection. The

possible values are Ethernet 1, Ethernet 2, ASI 1 and ASI 2.

 Output Name: If the Stream Display control at the top of the table is set to Stream

Names, this column will have the user-defined name for the output. If it is set to Stream

Addresses, it will have the destination IP address and UDP port for IP Outputs, and the

values ASI Output 1 and ASI Output 2 for the ASI ports.

 Delete: if you click on this button, the corresponding connection will be deleted.