Operation Manual

http://www.opengear.tv/dashboard-software/

Note that uploading firmware to the B264 does not affect its operation in any way and does not

introduce any glitches in the inputs/outputs, except when running RTMP at high bit rate. If you

are running RTMP at high bit rate, uploading firmware to the B264 may cause momentary

stream interruptions.

The fields in the Firmware Image Management tab are:

 Factory Image, Image 1, and Image 2: These contain version and release date

information for the corresponding firmware images. If no image is present, this field will

indicate No Image.

 Upload Location: This field contains the location where the image upload will go. The

B264 automatically chooses a location that will not overwrite the currently running image.

 Boot Location: This field indicates which image will be used in the next boot. If an

image is successfully uploaded through Dashboard, this automatically changes to point to

that image. It can also be manually changed.

 Auto-Reboot After Update: This field controls whether or not the B264 will

automatically reboot after a successful firmware upload through Dashboard. By default,

the B264 will not reboot after an update. You can upload the firmware at any time, and

reboot later during a maintenance window.