Operation Manual

GoStream Series User Guide
ViewCast 119
Adaptive Adobe Flash encoder with digital
inputs
To create an adaptive encoder, Encoders  All Encoders  Create New Encoder link  Encoder Type =
Adaptive Live Streaming Encoder Encoder Name field  Publisher = Adobe Flash Dynamic Streaming.
When you create a new encoder, the Encoder Properties window appears. The steps for editing a new
encoder or an existing encoder are identical. You must configure the audio and video settings for each
encoder type.
Use the Video, Audio, Output, and H.264 tabs to edit the settings. Begin with configuring the video and
audio settings, then the streaming properties. The server settings are different for each type of encoder.
From the Adaptive Adobe Flash Encoder Properties window (Figure 144), you can set the encoder to
start streaming automatically by clicking the Auto Start check box. You can also start the encoder from
this window by clicking the Start Adobe Flash Dynamic Streaming Encoder link in the top right corner of
the window.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click Save
Settings. Otherwise, all your changes will be lost.
Figure 144. Adaptive Flash encoder