Operation Manual

GoStream Series User Guide

ViewCast 171

Select the Audio Configurator tab.

Figure 206. Audio Configurator tab

Select the audio input in the Input 1 Connector Type field (Figure 207).

Figure 207. Input 1 Connector Type field

The Master Clock field should correspond to the video connectors on the back of the card. If

you change the connector on the card, you need to change the Master Clock field as well.

Note: The settings on the GoStream Ha are MFI-A and MFI-B. The settings on the GoStream

Sa are SDI A and SDI B.

10.

Click Apply and then OK.

11.

Reboot the system so your changes can take effect.

After you configure the inputs for the audio input card, any encoders that you create will display the

additional audio inputs on the Audio tab. If you configure the inputs after you create encoders, the

additional audio inputs will display on the Audio tab. However, if you change the audio connector on the

card and in Osprey Preview, you need to manually change the audio settings on each encoder in the

web interface.