Operation Manual

SNMP
210 ViewCast
Retrieving IP and MAC Addresses of the Encoder
System
The IP address and interface table are part of standard MIB functions as defined in RFC1213-MIB. It is
implemented by the native Windows SNMP service.
 The IP address per interface or NIC can be retrieved through .iso.org.dod.internet.mgmt.mib-
2.ip.ipAddrTable as defined in RFC1213-MIB.
 The MAC address per interface or NIC can be retrieved through
.iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifPhysAddress as defined in RFC1213-
MIB
SNMP Examples
Query system information (SNMP GET Example)
To query system information:
1.
Locate the VIEWCAST-AVENCODER-MIB.txt under C:\Program Files
(x86)\ViewCast\ViewCast SNMP Agent\.
2.
Load the VIEWCAST-AVENCODER-MIB.txt into the SNMP manager.
3.
Set object ID to
.iso.org.dod.internet.private.enterprises.viewcast.avencoder.avencoderMIB.systemInfo.
4.
Specify correct IP address of the targeted ViewCast SNMP agent: xx.xx.xx.xx
5.
Verify the Port field is set to 161.
6.
Set SNMP version to v1.
7.
Specify community such as getpassword with at least community right of READ ONLY.
8.
Send SNMP GET request message to the targeted ViewCast SNMP agent.