Operation Manual

GoStream Series User Guide
ViewCast 37
Web Interface
The GoStream includes a web interface, which allows you to access the advanced system settings. The
web interface also provides detailed settings and control over the encoder profiles installed on the
system. The web interface does not require software and works with any computer that has a current web
browser, including Microsoft Windows®, Macintosh®, and Linux® machines. For the best user experience,
ViewCast recommends Internet Explorer. The system either must reside on a shared IP network with the
computer or directly connected to a Microsoft Windows computer using an Ethernet cable (RJ45).
Logging in
When the unit is idle, it cycles through several System Ready screens that display the IP address, the serial
number, CPU usage, the available space on the hard drive, and amount of free RAM.
To log in:
1.
Locate the serial number:
 On the side or bottom of the system (in the format gp11430001)
Or
 From the LCD display when the system is idle (Figure 44).
Figure 44. System ready screen
Note: If the system ready screen with the serial number does not immediately display,
press the Up and Down slider to toggle through the system information until the
right screen appears.
2.
Open the web browser on your computer.
3.
You can either:
 Enter the GoStream serial number in the address bar (Figure 45).
Figure 45. Serial number
Or
 Enter the IP address in the address bar (Figure 46).
Figure 46. IP address