Operation Manual

GoStream Series User Guide
ViewCast 51
Video tab
Use the following table to configure the video analog input settings for an Adaptive Apple HTTP live
streaming encoder.
Note: The choices in the drop-down lists may vary.
Figure 63. Video tab
To configure video settings:
1.
Select the video input Source from the drop-down list.
Note: When SimulStream is enabled, you may use the same input source in another encoding
profile. This lets you encode the same audio and video at multiple data rates and multiple
formats to provide the best user experience for different viewing audiences.
2.
In the Input field, select the video input.
IMPORTANT! The video input must match the connectors on the back of the system and your
video source.
3.
In the Input Size field, select the pre-determined size of the encoded video from the drop-
down list.
You can also specify a custom size for your video. This customization is useful when you are
capturing video to be played on a mobile video-device that requires a non-standard size for
compatibility.
When you click Custom, two additional fields appear so you can enter the exact size you
want the resulting video to be (Figure 64).
Note: The size in the Width and Height fields must be divisible by 2.
Figure 64. Custom fields