Operation Manual

Analog Inputs
68 ViewCast
Adaptive Microsoft Smooth Streaming encoder
with analog inputs
To create an adaptive encoder, Encoders  All Encoders  Create New Encoder link  Encoder Type =
Adaptive Live Streaming Encoder  Encoder Name field  Publisher = Microsoft IIS7 Smooth Streaming.
When you create a new encoder, the Encoder Properties window appears. The steps for editing a new
encoder or an existing encoder are identical. You must configure the video and audio settings for each
encoder type.
Use the Video, Audio, Output, and H.264 Presets tabs to edit the settings. Begin with configuring the
video and audio settings, then the server and destination settings. The server and destination settings
are different for each type of encoder.
From the Encoder Properties window (Figure 84), you can set the encoder to start streaming
automatically by selecting the Auto Start check box. You can also start an encoder from this window by
clicking the Start Microsoft Smooth Streaming Encoder link in the top right corner of the window.
IMPORTANT! If you make any changes to the Encoder Properties window, you must click Save
Settings. Otherwise, all your changes will be lost.
Figure 84. Microsoft Smooth Streaming encoder