Operation Manual

-114-
To assign an encoder, select an encoder from the list and click the Submit button.
The Web page will update the Preset A EZStream button and report success in the form of a dialog
box such as the one shown directly below.
By clicking on the B and C buttons on the Niagara Pro graphic, you can assign encoders to those
EZStream buttons in the same way.
NOTE: It is not possible to assign the same encoder to two EZStream buttons simultaneously. If an
encoder is already assigned to a button and you assign it to another button, Niagara Pro will remove
the association to the previous button in favor of the most current request.