Operation Manual

-a-

Niagara Pro User Guide

Safety Instructions Rack

Mount

Rack Mount Instructions

A) Operating Temperature - If installed in a closed or

multi-unit rack assembly, the operating ambient

temperature of a rack environment may be greater than

room ambient. Therefore, consideration should be given

to installing the equipment in an environment compatible

with the maximum ambient temperature of 40

B) Reduced Air Flow - Installation of the equipment in a

rack should be such that the amount of air flow required

for safe operation of the equipment is not compromised.

C) Mechanical Loading - Mounting of the equipment in

the rack should be such that a hazardous condition is not

achieved due to uneven mechanical loading.

D) Circuit Overloading - Consideration should be given

to the connection of the equipment to the supply circuit

and the effect that the overloading of the circuits might

have on overcurrent protection and supply wiring.

Appropriate consideration of equipment nameplate

ratings should be used when addressing this concern.

E) Reliable Earthing - Reliable earthing of rack-mounted

equipment should be maintained. Particular attention

should be given to supply connections other than direct

connections to the branch circuit (e.g. use of power

strips).

FCC Notice

WARNING: Connections between this device and

peripherals must be made using shielded cables in order

to maintain compliance with FCC radio emission limits.

WARNING: Modifications to this device not approved

by ViewCast Corporation could void the authority

granted to the user by the FCC to operate the device.

The Niagara Pro described has been found to comply

with the limits for a Class A digital device, pursuant to