Operation Manual

-57-
Deleting an Encoder Profile
You can also delete encoder profiles from Niagara Pro. It is valuable to remove encoders you will
not use, as every encoder profile, regardless if active or idle, uses active memory.
NOTE: Once you delete a custom profile, you cannot restore it. It must be recreated.
NOTE: If you delete a default encoder profile, you can restore it by using the Restore to Factory
Settings function.
NOTE: Running the Restore to Factory Settings will remove any custom encoder profiles you have
created and load only the default encoder profiles.
To delete an encoder profile, you must access the All Encoders list in the Niagara SCX Web
Interface.
You can delete an encoder by clicking the Del link next to the encoder you wish to remove.
Alternatively, you can click the Edit link to view the encoder profile, and to verify it is the encoder
you wish to remove.