MW NIAGARA ELECTRIC BIDET SEAT SB-EL1000 ® SAFETY PRECAUTION ® PARIS DIAGRAM PRODUCT OVERVIEW.
SAFETY PRECAUTIONS SAFETY PRECAUTIONS When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING Danger To reduce the risk of electrocution: 1. Do not use while bathing. 2. Do not place or store product where it can fall or be pulled into a tub or sink. 3. Do not place in or drop into water or other liquid 4. Do not reach for a product that has fallen into water. Unplug immediately.
SAFETY PRECAUTIONS SAFETY PRECAUTIONS Please carefully read this manual before use and keep for future reference. The following icons are used in this manual to indicate varying verities of hazards. Please abide by these precautions, otherwise serious consequences may occur. I's NOTATION 103/ WARNING ATTENTION PROPER BLOOPER Please pay close attention to avoid serious harm or accidents. If not attentive, body or property damage may result. Caution Comply with guidelines.
SAFETY PRECAUTIONS SAFETY PRECAUTIONS /N\ ATTENTION ~\ to wipe up any spills that spas onto the plastic areas of the product. De not use any acidic chemical detergent. Only neutral detergents are permitted. » Otherwise, the plastic may break and cause body damage, electric shock, or fire. using any chemical toilet bowl cleaner, be aura S Do not stand, sit, or lean forcefully on the lid of the bidet toilet seat. Do not open or close the lid/seat ring forcefully to avoid damage.
PARTS DIAGRAM PARTS DIAGRAM Caution Label Retainer Ring Power Cord Dryer Door Nozzle (Posterior & Feminine Wash) Heated Seat Water tank inlet Existing water pipe Water Valve Existing Toilet Bowl Side Buttons 107/ H/C Massage J Feminine Wash | Posterior Wash J Nozzle Position Warm / Cold Massage ~~ Clean your front Flush after defecation Clean your rear Adjust the nozzle + Nozzle Oscillation position (back and forth) Arithmetic @ NIAGARA Feminine, Posterior] s Wash P Wash Water) {D Sat Night Light JER Stop J
PRODUCT INSTALLATION PRODUCT INSTALLATION Adjustable Wrench {1.
PRODUCT INSTALLATION PRODUCT INSTALLATION 1] [Install the electronic bidet seat 1. Remove the existing toilet seat. (a) Remove the toilet seat mounting bolts. (b) Remove the existing toilet seat from the toilet, Existing seat Screw Half spherical washer = Sliding washer Nut Twist to loosen 2. Insert the inflated rubber tube set into the mounting holes on the toilet bowl. i Mounting holes I 3. Place the Fixed Card on the toilet bowl where the mounting holes are.
PRODUCT OPERATION PRODUCT OPERATION » Functions will only work when user is seated on the bidet seat. » Dryer will automatically stop after 4 minutes. Posterior Wash » Function: Water sprays. from the nozzle to wash the for. B To Activate: Press “Posterior Wash” button once. Press button twice tn activate oscillating spray. » Function: Water sprays from the nozzle to wash the Fran (far Women). » To Activate: Press “Feminine Wash” button once. Press button twice to activate oscillating spray.
PRODUCT OPERATION PRODUCT OPERATION » Dryer will automatically stop after 4 minutes. I> Press the “Stop” button to stop the dryer. Feminine Wash @®E® ra » Function; Dries front and rear, I> To Activate: Press “Dryer” ant Press the "Dryer" button again, ‘wind speed can be adjuster to 3. 115/ Fie TL » Function: Alternate water temp of spray between cold water to hot tare in turns, » To Activate: While In wash mod, press the *HIC Massage” button once, @ NIAGARA uso SOFTEN hla » Fun ct it.
PRODUCT OPERATION PRODUCT OPERATION » Before maintenance, please unplug the power source and shut off the water supply. » Regular maintenance is required to ensure that the product operates at optimum efficiency. Maintenance of Lid, Seat, and Plastic Parts » Wipe the lid, seat, and plastic parts with a wet soft cloth (water). » Please wipe with cater frequently or the product will become hard to clean Eater If the dirt and debris Is not removed on time.
PRODUCT OPERATION PRODUCT OPERATION » If you experience any of the problems below, please follow the suggested solutions.
PRODUCT INFORMATION Model Number SB-EL1000 Rated Voltage AC 120V, 60Hz Rated Power 1050W Environmental Temp 5C-40C Water In jet Environment 5C-40°C Minimum necessary The range of water water pressure 0.08MPa, and lase make sure the water flow is above Inlet pressure Maximum water pressure 0.75MPa (in a static condition) Flushing Way for heating Transient heating Temp pf warm water Off/about The length of power [ine 12m The she of product 20.43" x 15.16" x 4.
