SDS

Copper Fittings and Components (Cast, Wrought
(Wrot) and Forged)
Safety Data Sheet
according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012
Date of issue: 06/01/2015 Revision date: 06/01/2015 Version: 1.0
06/01/2015 EN (English) Page 1
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form :
Article
Product name : Copper Fittings and Components (Cast, Wrought (Wrot) and Forged)
Product code : Not available
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : Copper fittings and components used in plumbing, piping and other applications
1.3. Details of the supplier of the safety data sheet
NIBCO INC.
1516 Middlebury St.
Elkhart, IN 46516 - USA
General: 574-295-3000 / 800-642-5463
Technical Services: Voice 888-446-4226 / Fax [phone]
[e-mail] - http://www.nibco.com
1.4. Emergency telephone number
Emergency number : ChemTel: 800-255-3924; International: +01-813-248-0585
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
This product is classified as an “article” under the OSHA HAZCOM 2012, Subpart Z - Toxic & Hazardous Substances, and as such is exempt from the
requirement for classification.
2.2. Label elements
GHS-US labelling
This product is classified as an “article” under the OSHA HAZCOM 2012, Subpart Z - Toxic & Hazardous Substances, and as such is exempt from the
requirement for labeling.
2.3. Other hazards
No additional information available.
2.4. Unknown acute toxicity (GHS-US)
Not applicable.
SECTION 3: Composition/information on ingredients
3.1. Substance
Not applicable.
3.2. Mixture
Name
Product identifier
%
GHS
-
US classification
None required.
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures after inhalation : Not applicable for product in finished form.
First-aid measures after skin contact : Not applicable for product in finished form. If irritation occurs, flush skin with plenty of water.
Get medical attention if irritation persists.
First-aid measures after eye contact : Not applicable for product in finished form. If irritation occurs, immediately flush eyes with
plenty of water. Remove contact lenses, if worn. If irritation persists, get medical attention.
First-aid measures after ingestion : Not applicable for product in finished form.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries after inhalation : Not a normal route of exposure.
Symptoms/injuries after skin contact : No known adverse effects.
Symptoms/injuries after eye contact : No known adverse effects.
Symptoms/injuries after ingestion : Not a normal route of exposure.