SDS

CPVC Plastic Fittings / Valves
Safety Data Sheet
according to the Hazard Communication Standard (CFR29 1910.1200) HazCom 2012
Date of issue: 06/01/2015 Revision date: 06/01/2015 Version: 1.0
06/01/2015 EN (English) Page 1
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form :
Article
Product name : CPVC Plastic Fittings / Valves
Product code : Not available
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture : Various uses from plumbing to other piping application and types of flow control
1.3. Details of the supplier of the safety data sheet
NIBCO INC.
1516 Middlebury St.
Elkhart, IN 46516 - USA
General: 574-295-3000 / 800-642-5463
Technical Services: Voice 888-4446-4226 / Fax [phone]
[e-mail] - http://www.nibco.com
1.4. Emergency telephone number
Emergency number : ChemTel: 800-255-3924; International: +01-813-248-0585
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
GHS-US classification
This product is classified as an “article” under the OSHA HAZCOM 2012, Subpart Z - Toxic & Hazardous Substances, and as such is exempt from the
requirement for classification.
2.2. Label elements
GHS-US labelling
This product is classified as an “article” under the OSHA HAZCOM 2012, Subpart Z - Toxic & Hazardous Substances, and as such is exempt from the
requirement for labeling.
2.3. Other hazards
No additional information available
2.4. Unknown acute toxicity (GHS US)
Not applicable
SECTION 3: Composition/information on ingredients
3.1. Substance
Not applicable
3.2. Mixture
Name
Product identifier
%
GHS
-
US classification
None required.
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures after inhalation : Not applicable for product in finished form.
First-aid measures after skin contact : Not applicable for product in finished form. If irritation occurs, flush skin with plenty of water.
Get medical attention if irritation persists.
First-aid measures after eye contact : Not applicable for product in finished form. If irritation occurs, immediately flush eyes with
plenty of water. Remove contact lenses, if worn. If irritation persists, get medical attention.
First-aid measures after ingestion : Not applicable for product in finished form.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries after inhalation : Not a normal route of exposure.
Symptoms/injuries after skin contact : No known adverse effects.
Symptoms/injuries after eye contact : No known adverse effects.
Symptoms/injuries after ingestion : Not a normal route of exposure.