Buying Guide

61
NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
Visit our website for the most current information.
www.nibco.com
AHEAD OF THE FLOW
®
NIBCO
®
Press System Bronze Ball Valves
Two-Piece Body • Full Port • Bronze Trim • ³⁄₄" Hose Connection with Cap and Chain •
Blowout-Proof Stem
600 psi/41.4 bar non-shock cold working pressure
250°F maximum operating temperature
CONFORMS TO MSS SP-110
PS-585-70-HC
Press Male x Hose End
MATERIAL LIST
PART SPECIFICATION
1. Handle Nut Zinc Plated Steel
2. Handle Zinc Plated Steel
3. Pack Gland Brass ASTM B 16 Alloy C36000
4. Packing PTFE
5. Thrust Washer RPTFE
6. Stem Silicon Bronze ASTM B 371 Alloy C69430
7. Ball Brass ASTM B 16 Alloy C36000 or ASTM B 124
Alloy C37700 (Chrome/Nickle Plated)
8. Seat Rings Reinforced PTFE
9. Body Assembly Bronze ASTM B 584 Alloy C84400
10. Hose Body End Brass ASTM B 124 Alloy C37700
11. Cap Die Cast Brass
12. Gasket Rubber
13. Chain Brass
14. Stub Out Type “L” Copper Tube
Cap is for hose end thread protection only. Not to be used for pressure containing purposes.
DIMENSIONS—WEIGHTS
Dimensions
Size A B C Weight
In. mm. In. mm. In. mm. In. mm. Lbs. Kg.
¹⁄₂ 15 4.90 124 1.88 48 7.19 183 .81 .37
³⁄₄ 20 5.47 139 2.25 57 8.25 210 1.54 .70
PS-585-70-HC
Press x Hose
NIBCO Press System ball valves are designed to meet MSS
SP-110 with the exception of the end connection. Ball valves
are down-rated from 600 psi CWP to 200 psi CWP to match the
NIBCO
Press System. Male and female press-to-connect ends
are new technology not yet covered in the current edition of
this specification.
Revised 7/25/2018
WARNING: This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.