Material Safety Data Sheet

ManualsBrandsNibco ManualsABS DWV 45° Wyes (H x H x H)1-1/4" Hub ABS DWV 45° Wye (5810)

MSDS No.: FP-2

Date: 06/01/1989

Revisions: 01/02/2002

MATERIAL SAFETY DATA SHEET

SECTION I GENERAL INFORMATION

A. Material Name: ABS Plastic Fittings / Valves / Pipe

Other Names: Styrene Copolymer Chemical Family: Grafted Copolymer

B. Manufacturer: NIBCO INC. Telephone: 219-295-3000

1516 Middlebury St. For chemical emergency - spill, leak,

P.O. Box 1167 fire exposure or accident, call:

Elkhart, IN 46516 CHEMTEL 1-800-255-3924 day or night

SECTION II Composition / Information on Ingredients

Ingredient CAS # Weight % ACGIH TLV OSHA PEL

Acrylonitrile / Butadiene/

Styrene Resin (ABS Resin)

9003-56-9

90 - 100

none established

Mineral Oil 8042-47-5 0 - 2 none established none established

Tallow 8030-12-4 0 -2 none established none established

Wax 110-30-5 0 - 2 none established none established

KNOWN HAZARDS UNDER 29 CFR 1910.1200

Yes No

Combustible Liquid

Skin Hazard

Oxidizer

Reproductive Toxin

Flammable Material

Eye Hazard

Organic Peroxide

Blood Toxin

Pyrophoric Material

Toxic Agent

Corrosive Material

Nervous Sys. Toxin

Explosive Material

Highly Toxic Agent

Compressed Gas

Lung Toxin

Unstable Material

Sensitizer

Irritant

Liver Toxin

Water Reactive Mat.

Carcinogen

Kidney Toxin

Comments

<1% pigment added to base ABS material for color; not reportable under 1910.1200

______________________________________________________________________________

_______________________________________________________________________________

Summary of content (4 pages)

PAGE 1
MSDS No.: FP-2 Date: 06/01/1989 Revisions: 01/02/2002 MATERIAL SAFETY DATA SHEET SECTION I A. GENERAL INFORMATION Material Name: ABS Plastic Fittings / Valves / Pipe Other Names: Styrene Copolymer B. Manufacturer: SECTION II Ingredient Chemical Family: Grafted Copolymer NIBCO INC. 1516 Middlebury St. P.O.
PAGE 2
MSDS NO. FP-2 01/02/02 PAGE 2 OF 4 SECTION II Composition / Information on Ingredients (CONTINUED) SHIPPING INFORMATION SPECIAL HAZARD DESIGNATIONS DOT HAZARD CLASS: N/A DOT SHIPPING NAME: N/A HMIS NFPA HEALTH: 0 0 0 - MINIMAL FLAMMABILITY: 0 0 1 - SLIGHT REACTIVITY: 0 0 2 - MODERATE PROTECTIVE EQUIPMENT: - - 3 - SERIOUS SHIPPING I.D.
PAGE 3
MSDS NO. FP-2 01/02/02 SECTION VI PAGE 3 OF 4 HEALTH HAZARD DATA Route(s) of Entry: ⌧ Inhalation Ingestion Skin Health Hazards (Acute and Chronic): The fittings as received do not present an inhalation, skin contact or eye contact hazard. Listed hazards may result from cutting or sanding of the fittings. A. Metals: B.
PAGE 4
MSDS NO. FP-2 01/02/02 SECTION VII PAGE 4 OF 4 SPILL OR LEAK PROCEDURES A. Special Handling or Storage: Store fittings away from weather and heat. B. Spill or Leak Containment: For spills of broken fittings, sweep from floor for stable footing and to prevent slips by personnel. C. Waste Disposal: Dispose of waste in a licensed landfill or incinerate in accordance with federal, state and local regulations. D. Other Precautions: None. SECTION VIII SPECIAL PROTECTION INFORMATION A.