Material Safety Data Sheet

MSDS NO. FP-2 01/02/02 PAGE 2 OF 4
SECTION II Composition / Information on Ingredients (CONTINUED)
SHIPPING INFORMATION SPECIAL HAZARD DESIGNATIONS
DOT HAZARD CLASS: N/A
HMIS NFPA HAZARD RATING
DOT SHIPPING NAME: N/A HEALTH: 0 0 0 - MINIMAL
FLAMMABILITY: 0 0 1 - SLIGHT
REACTIVITY: 0 0 2 - MODERATE
PROTECTIVE EQUIPMENT: - - 3 - SERIOUS
SHIPPING I.D. NUMBER: N/A 4 - SEVERE
SECTION III PHYSICAL DATA
Melting Point: N/A, softening @ 194 °F Vapor Pressure (mm Hg): N/A
Boiling Point: N/A Vapor Density (AIR=1): N/A
Specific Gravity (H
2
O=1): 1.05 Solubility in Water: Insoluble
Appearance and Odor: Color: Opaque, Black, Off White or Green; odorless solid
SECTION IV FIRE AND EXPLOSION HAZARD DATA
Flash Point (method used): 730 - 752 °F
LEL: N/A UEL: N/A
Extinguishing Media: Water spray, ABC dry chemical, foam, carbon dioxide
Special Fire fighting Procedures: Fire fighters should be equipped for protection against high heat,
depletion of oxygen, heavy smoke and molten plastic.
Unusual Fire and Explosion Hazards: Under burning conditions, ABS will release acrylonitrile,
butadiene, styrene, hydrocarbon fragments, hydrogen cyanide, carbon monoxide and carbon dioxide.
The combustion products of ABS like those from other natural and synthetic products must be
considered toxic.
SECTION V REACTIVITY DATA
A. Stability ⌧ Stable  Unstable
Conditions to Avoid: N/A
B. Hazardous Polymerization:  May Occur ⌧ Will Not Occur
Conditions to Avoid: N/A
C. Incompatible Materials: None known
D. Hazardous Decomposition Products: Hydrogen cyanide, carbon monoxide, carbon dioxide
and small amounts of acrylonitrile, butadiene, and styrene..