Material Safety Data Sheet

MSDS NO. FP-2 01/02/02 PAGE 4 OF 4
SECTION VII SPILL OR LEAK PROCEDURES
A. Special Handling or Storage:
Store fittings away from weather and heat.
B. Spill or Leak Containment:
For spills of broken fittings, sweep from floor for stable footing and to prevent slips by
personnel.
C. Waste Disposal:
Dispose of waste in a licensed landfill or incinerate in accordance with federal, state and local
regulations.
D. Other Precautions:
None.
SECTION VIII SPECIAL PROTECTION INFORMATION
NIOSH approved for organic vapor when
A. Respiratory Protection (specify type): solvent welding in poorly ventilated areas.
B. Ventilation:  Local Exhaust  Mechanical (General)
Other (specify): N/A
glasses or goggles
C. Eye Protection: ⌧ Yes  No Type: when solvent welding
Srubber or PVA coated
D. Protective Gloves: ⌧ Yes  No Type: when solvent welding
E. Other Protective Equipment or Clothing:  Yes ⌧ No
Type: N/A
F. Special Precautions or Work Practices: N/A
DISCLAIMER OF LIABILITY
The information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without
any warranty, express or implied, regarding its correctness.
The conditions or methods of handling, storage, use and disposal of the product are beyond our control and may be beyond our
knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense
arising out of or in any way connected with the handling, storage, use or disposal of the product.