Warranty

NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227
TECH SERVICES PH: 1.888.446.4226 • FAX: [phone] • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: [phone]
www.nibco.com
30
AHEAD OF THE FLOW
®
www.nibco.com
Revised 4/29/2015
Revised 1/1/2014
NIBCO INC. LIMITED WARRANTY
Applicable to NIBCO INC. Specialty Valve Products Only
NIBCO INC. warrants each NIBCO
®
specialty valve products to be free from defects in materials and workmanship under
normal use and service for a period of two (2) years from date of purchase.
In the event any defect occurs which the owner believes is covered by this warranty, the owner should immediately contact
NIBCO Technical Services, either in writing or by telephone at 1.888.446.4226 or 1.574.295.3000. The owner will be
instructed to return said valve, at the owner’s expense, to NIBCO INC., or an authorized representative for inspection. In the
event said inspection discloses to the satisfaction of NIBCO INC. that said valve is defective, a replacement shall be mailed
free of charge to the owner, and NIBCO INC. shall further pay the installing contractor the sum of fifty ($50.00) dollars to be
applied toward the cost of installation of the replacement valve.
TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY SPECIFICALLY EXCLUDES INCIDENTAL AND CONSEQUENTIAL
DAMAGES OF EVERY TYPE AND DESCRIPTION RESULTING FROM ANY CLAIMED DEFECT IN MATERIAL OR
WORKMANSHIP, INCLUDING BUT NOT LIMITED TO, PERSONAL INJURIES AND PROPERTY DAMAGES.
Some states or countries do not allow the exclusion or limitation of incidental or consequential damages so these
limitations may not apply to you.
TO THE EXTENT PERMITTED BY LAW, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN DURATION.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country
to country.
State quantity, figure number and size for each valve or
fitting you wish to order. See individual catalog pages
for specific or special product designations.
HOW MANY TO ORDER
NIBCO valves and fittings are decimal packed for your
convenience in handling, shipping and stock-keeping.
Number in master carton varies with item.
POLICY ON RETURNS TO FACTORY
No NIBCO valves and fittings are to be returned with-
out prior written agreement. Transportation must be
prepaid. A 20% charge will be made to cover cost of
rehandling and reinspection.
TECHNICAL ASSISTANCE
Engineers, contractors, wholesalers or manufacturers
may obtain special or technical assistance from any
factory representative of NIBCO. Write, fax or phone.
NIBCO INC.
World Headquarters
1516 Middlebury Street
Elkhart, IN 46516-4740
USA
PH: 1.574.295.3000 or 1.888.446.4226
FAX: [phone] or 1.888.336.4226
How to Order
To the best of our knowledge, the information contained in this publication is accurate. However, NIBCO does not assume any liability whatsoever for
the accuracy or completeness of such information. Final determinations of the suitability of any information or product for the use to be contemplated
is the sole responsibility of the user. The manner of that use, and whether there is any infringement of patents, is also the sole responsibility of the user.
NIBCO
®
Specialty Valve Products Warranty