Installation Instructions

English – 14
A.11 - Adjusting the “sun” climate sensor threshold (sensors without on-board trimmer only)
NOTES AND WARNINGS
• If the sensor has an on-board trimmer, ignore this procedure and refer to the sensor’s instructions for adjusting the threshold directly on the trimmer.
• The product is factory set to a threshold of 15 Klux.
1 2 3
 4
PRG
(x 1)
2
PRG
(x 1)
2
= 5 sec
3
Press and release
the button (1 time);
count 2 movements. Press and release
the button (1 time);
count 2 movements. Hold down the button and release it after 5
seconds;
count 3 movements.
4
continues

Select the desired op-
tion and program it as
follows 
(x ...)
5 OPTIONS:
1 press = sets the threshold to 5 Klux
2 presses = sets the threshold to 10 Klux
3 presses = sets the threshold to 15 Klux
4 presses = sets the threshold to 30 Klux
5 presses = sets the threshold to 45 Klux
Press and release the button the number of times indicated in the option you have chosen;
 4
5
end
7
sec.
?
1 /
2 /
3 /
4 /
5 /
= 5 sec
3
After about 7 seconds, the motor performs a num-
ber of movements equal to the number of pulses
entered.
Hold down the button and release it after 5 seconds; count 3 movements.
A
4
continues

Select the desired op-
tion and program it as
follows 
(x ...)
5 OPTIONS:
1 press = sets 7 seconds
2 presses = sets 15 seconds
3 presses = sets 20 seconds
4 presses = sets 30 seconds
5 presses = deactivates the function and sets nominal speed
Press and release the button the number of times indicated in the option you have chosen;
 4
5
end
7
sec.
?
1 /
2 /
3 /
4 /
5 /
= 5 sec
3
After about 7 seconds, the motor performs a num-
ber of movements equal to the number of pulses
entered.
Hold down the button and release it after 5 seconds; count 3 movements.