Nice MYGOBD MYGOBD/A Two-way transmitters MYGO2BD MYGO2BD/A EN - Instructions and warnings for installation and use MYGO4BD MYGO4BD/A 1 5 2 6 3 7 4 8 MYGO8BD MYGO8BD/A
ENGLISH Translation of the original instructions in full 1 GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . . 2 PRODUCT DESCRIPTION AND INTENDED USE . . . . . . . . . 3 3 MEMORISING THE TRANSMITTER . . . . . . . . . . . . . . . . . . . 4 4 5 6 7 8 STATUS REQUEST PROCEDURE . . . . . . . . . . . . . . . . . . . . . 5 ENCODING SWITCH PROCEDURE . . . . . . . . . . . . . . . . . . . . 5 DELETION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 REPLACING THE BATTERY . . . . . . . .
2 2 PRODUCT DESCRIPTION AND INTENDED USE PRODUCT DESCRIPTION AND INTENDED USE Transmitters of the series MYGOBD (MYGOBD/A) are designed to control automations (gates, garage doors, road barriers and similar). a CAUTION! – Any use other than that specified herein or in environmental conditions other than those stated in this manual is to be considered improper and is strictly forbidden! 2.1 LIST OF CONSTITUENT PARTS “Figure 1” shows the main parts making up MYGOBD (MYGOBD/A) transmitters.
3 3 MEMORISING THE TRANSMITTER MEMORISING THE TRANSMITTER 3.1 TRANSMITTER VERIFICATION Before memorising the transmitter in the automation’s receiver, ensure that it is working correctly by pressing any button while observing whether LED (A) lights up. If LED (A) fails to light up, check the condition of the battery and replace it if necessary (refer to the “REPLACING THE BATTERY” paragraph on page 5). 3.2.
4 4 STATUS REQUEST PROCEDURE l A command button can only be memorised in multiple automations if the same radio technology is used (either one-way or two-way). l Each single encoding allows for exploiting only the functions linked to that specific encoding system. STATUS REQUEST PROCEDURE The following procedure can be used to know the automation’s status through the transmitter (for example, whether the gate is open or closed). To request the status: 1.
8 8 l This product is an integral part of the operator and must therefore be disposed of with it. As with the installation, only qualified personnel must dismantle the product at the end of its life. This product is composed of different types of materials. Some of these materials can be recycled; others must be disposed of. Please enquire about the recycling or disposal systems in place in your local area for this type of product.
11 11 ACCESSORIES ACCESSORIES 11.1 STRING FOR KEYRING The string (A), supplied as an accessory with the transmitter, is useful for fastening the transmitter itself to a keyring or other similar object. To fasten it, wrap the string around slot (B) present on the transmitter. 11 B A 11.2 FASTENING SUPPORT The support (A), which can be ordered separately as an accessory, can be used for fastening the transmitter to various objects such as, for example, sun shades for cars.
IS0808A00EN_12-01-2022 Nice SpA Via Callalta, 1 31046 Oderzo TV Italy info@niceforyou.com www.niceforyou.
