Installation Instructions

2 – ENGLISH
ENGLISH
Translation of the original instructions in full
CONTENTS
GENERAL SAFETY WARNINGS AND
PRECAUTIONS
1
1 GENERAL SAFETY WARNINGS AND PRECAUTIONS
a
CAUTION! – This manual contains important instruc-
tions and warnings for personal safety. Carefully read
all parts of this manual. If in doubt, suspend installa-
tion immediately and contact the Nice Technical As-
sistance.
a
CAUTION! – Important instructions: keep this manual
in a safe place to enable future product maintenance
and disposal procedures.
– The product packing materials must be disposed of in com-
pliance with local regulations.
– Never apply modications to any part of the device. Oper
-
ations other than those specied may only cause malfunc-
tions. The manufacturer declines all liability for damage
caused by makeshift modications to the product.
– Never place the device near to sources of heat and never
expose to naked ames. These actions may damage the
product and cause malfunctions.
– This product is not intended for use by people (including chil
-
dren) with reduced physical, sensory or mental capabilities or
who lack experience and knowledge, unless they have been
given supervision or instruction concerning the use of the
product by a person responsible for their safety.
– Make sure that children do not play with the product.
– Handle the product with care, being sure not to crush, knock
or drop it in order to avoid damage.
– The batteries must be removed from the appliance prior to
its disposal.
– The batteries must be disposed of in a safe way.
– The manufacturer of this appliance, Nice S.p.A., hereby de
-
clares that the product complies with Directive 2014/53/EU.
– The instruction manual and the full text of the EU Declaration
of Conformity are available at the following Internet address:
www.niceforyou.com, under the “support” and “download”
sections.
– For transmitters: 433 MHz: ERP < 10 dBm.
1 GENERAL SAFETY WARNINGS AND PRECAUTIONS . . . . . 2
2 PRODUCT DESCRIPTION AND INTENDED USE . . . . . . . . . 3
2.1 List of constituent parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2 Transmitter functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 MEMORISING THE TRANSMITTER . . . . . . . . . . . . . . . . . . . . 4
3.1 Transmitter verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2 Memorising the transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2.1 Memorisation in “Mode 1” . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2.2 Memorisation in “Mode 2” . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2.3 Memorisation in “Extended Mode 2” . . . . . . . . . . . . . . . . . . . 4
3.2.4 Memorisation through the “ENABLING Code” (between an
OLD transmitter already memorised and a NEW transmitter) . 4
4 STATUS REQUEST PROCEDURE. . . . . . . . . . . . . . . . . . . . . . 5
5 ENCODING SWITCH PROCEDURE . . . . . . . . . . . . . . . . . . . . 5
6 DELETION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 REPLACING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 PRODUCT DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
8.1 Battery disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
9 TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . 6
10 CONFORMITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
10.1 SIMPLIFIED EU DECLARATION OF CONFORMITY . . . . . . . . . . 6
10.2 COMPLIANCE WITH THE FCC RULES (PART 15) AND WITH
RSS-210 RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
11 ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11.1 String for keyring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11.2 FASTENING SUPPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7