MAP Smart Media Centre ND-600 User's Guide
Important Safety Instructions When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and Moisture The unit should not be used near water.
The user should not attempt to service the unit beyond those methods described in the user's operating instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel. Warnings: - Battery shall not be exposed to excessive heat such as sunshine, fire or the like. - Be sure that the battery are installed correctly. Wrong polarity may damage the unit. - Do not mix old and new batteries.
System Connection The MAP Smart Media Centre system can implement following function: (A) It streams photo / music / video files from your Smart Phone through a Wi-Fi (wireless) network. (B) The MAP Base unit playback photo / music / video files which stored in the USB / SD memory device. (C) In tablet mode, you can access Internet through the Wi-Fi (wireless) network. Before operate the MAP Smart Media Centre, follow the setup that described in below system connection.
Note: For Wi-Fi (wireless) setup, please read “Settings” section in this manual. To have Internet operation, your Wi-Fi (wireless) router should be connected to the Internet network. 4. Power Connection (a) Connect the DC output power plug of the AC-DC power adaptor to the DC-IN socket located at rear of the unit. (b) Firmly and securely plug the AC-DC power adaptor into the AC main outlet. 5. Smart Phone With a Smart Phone installed the MAP Mobile App (the application program).
9. AUX button ----- Select AUX (Auxiliary) mode. 10. BASE button ----- Select BASE mode, a shortcut to enable the default media player of the system. 11. TABLET mode indicator ----- Lights on whilst Tablet mode is activated. 12. PHONE mode indicator ----- Lights on whilst the MAP Base App is running (active). 13. AUX-IN mode indicator ----- Lights on whilst the AUX mode is selected. 14. Speakers 15. POWER indicator ----- Lights on whilst the MAP base unit is turned on. 16.
15. AUX button ----- Select AUX (Auxiliary) mode. 16. USB/SD button ----- Select USB/SD mode (Base mode), a shortcut to enable the default media player of the system. 17. HDMI AUDIO ON/OFF button 18. HDMI button ----- Press to select HDMI video as an output source. 19. HOME button 20. Left button 21. Down button 22. button ----- Skip tracks Backward. 23. AUX VOL + / - button ------ Adjust AUX volume level up or down. 24.
Settings MAP Base unit and Wi-Fi Router pairing The MAP system needs a Wi-Fi router (wireless network) working together and the router connected to Internet which is preferred. For the MAP Base unit pair with the Wi-Fi Router With the system set up as illustrated in diagram A above, you can start to implement some initial settings. (1) Turn on the router. (2) Connect a USB mouse to the USB port located at rear of the MAP Base unit.
Note: In the case of step (1) above, the router has not been turned on and after steps (3) & (4) the TV screen will pop up a [No Local Network] dialog box which prompt for the Wi-Fi connection. You can implement following steps. (a) Turn on the desired router. (b) From the [No Local Network] dialog box ----- Select and confirm the item [Launch Network Settings]. The [Wi-Fi Settings] screen displays.
(B) Implement from the Android Smart Phone: (1) With your Android Smart Phone paired with the Wi-Fi router that connected to the Internet. (2) From your Android Smart Phone, link to Android Market (Google Play). (3) Log in Android Market (Google Play). Note: If you don’t have a log in account, apply an account from Android Market (Google Play) first. (4) Search for the MAP Mobile App (App name ---- MAP Mobile) from Android Market (Google Play) web. (5) Select “Install “and confirm the installation.
In case there are several MAP Base units in the network, a list of the MAP Base unit’s name displayed. (b) Select the desired MAP Base unit from the list. (c) A screen with [PHONE] and [USB/SD] buttons display. [Phone] -------- Playback mobile phone’s media file. [USB/SD] ----- Playback MAP Base unit USB/SD’s media file. Select the desired playback file source, [Phone] or [USB/SD]. (d) A screen with [Music] / [Video] / [Image] / [Browse] buttons display.
To display photo, playback music or video, select the desired file from the folders [scsi_sda1] / [tflash] or their sub-folders. Controls: - Press the / button to skip tracks Backward / Forward. - Press button to Play / Pause music playback. - Press the P-MODE button from the remote control to select play mode: Repeat Off / Shuffle / Repeat all songs / Repeat current song. - Using the navigation button or mouse to select desired item on the screen.
Care and Maintenance - Do not subject the unit to excessive force, shock, dust or extreme temperature. Do not tamper the internal components of the unit. Clean your unit with a damp (neverwet) cloth. Solvent or detergent should never be used. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.