User's Manual

3
The user should not attempt to service the unit beyond those methods described in the user's
operating instructions. Service methods not covered in the operating instructions should be
referred to qualified service personnel.
Warnings:
- Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- Be sure that the battery are installed correctly. Wrong polarity may damage the unit.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Only batteries of the same or equivalent type as recommend are to be used.
- If the unit is not to be used for an extended period of time, remove the battery.
- Do not dispose of batteries in fire, battery may explode or leak.
- Danger of explosion if battery is incorrectly replaced.
Features
Thank you for purchasing the MAP (My Air Play) Smart Media Centre.
This model incorporates following features :
- Streams Photo / Audio / Video files from a Smart Phone (a mobile phone running Android OS
or Apple iOS device, e.g. iPod Touch / iPhone / iPad).
- Playback Photo / Audio / Video files from USB / SD memory device.
- Displays photo and playback video on external TV set (or display device) with HDMI or
Composite video input.
- Access Internet function.
- Mouse or Keyboard connection for easy access to Internet operation.
- Built-in high fidelity speakers.
- Built in Subwoofer with heavy bass effect.
- Audio line-in (AUX) for connecting other digital audio player
- Remote Control operation
iPad, iPhone and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Smart Phone, iPad, iPhone, iPod Touch are not included.
Installation
Clock battery back-up
For the unit has been worked for a very long period, where the backup battery voltage may
discharge to a low level which cannot backup the system clock (the cpu time base) of the unit. In
this case you need to replace it with the fresh one.
(1) A backup battery compartment located at the bottom of the main unit.
(2) Open the battery compartment lid.
(3) Follow the polarity diagram shown inside the compartment and install 2 x AAA (UM-4)
type batteries (not included).
(4) Close the battery compartment lid.
Remote Control
The remote control operates on a CR2025 battery (included).
To activate the remote control, remove the insulation tab attached in the battery compartment.