Instructions / Assembly

Find your niche
VERSATILE AND MODERN
CUBO STORAGE CUBE PC1211
ASSEMBLY INSTRUCTIONS
STEP 2
OPTIONAL STEP 4: ATTACHING TWO CUBES
Aach both Side Panels (C)
to the Boom Panel (A)
by lining up lock dowels
and pins with their
coordinang holes
and pressing down
in to place.
Note: Pieces snap together in numerical order.Note: Pieces snap together in numerical order.
Note: You may need to tap in to place with a rubber mallet.
A
STEP 3
CC
Aach Top Panel (A) by lining up holes with coordinang lock
dowels and pins on the Back Panel (B) and Side Panels (C) and
pressing down in to place.
To aach two cubes together, insert Spring Pins (D) in to pre-drilled holes on side of Cube of your preference. Next line up holes on
second cube with Spring Pins (D) and press in to place. See Figures 1 & 2 for Spring Pin (D) placement. Be Creave!
Figure 1: When aaching cubes top
to boom when both cubes are facing
forward, insert Spring Pins (D) into all
three pre-drilled holes. When rotang
one of the two cubes like pictured to
the right, place Spring Pins (D) into
only 2 coordinang holes.
Figure 2: When aaching cubes side
to side, insert Spring Pins (D) into all
four pre-drilled holes.
A
B
CC