NICHIA STS-DA1-2554A
NICHIA STS-DA1-2554A SPECIFICATIONS (1) Absolute Maximum Ratings Symbol Absolute Maximum Rating Unit Forward Current Item IF 180 mA Pulse Forward Current IFP 240 mA Allowable Reverse Current IR 85 mA Power Dissipation PD 630 mW Operating Temperature Topr -40~100 °C Storage Temperature Tstg -40~100 °C Junction Temperature TJ 120 °C * Absolute Maximum Ratings at TS=25°C. * IFP conditions with pulse width ≤10ms and duty cycle ≤10%.
NICHIA STS-DA1-2554A RANKS Item Forward Voltage Luminous Flux Rank Min - Unit V 2.6 3.5 P14 51.0 60.5 P13 42.8 51.0 P12 Color Rendering Max R8000 lm 36.0 42.8 Ra 80 - - R9 0 - - Color Ranks Rank sw27 Rank sw30 x 0.4373 0.4562 0.4813 0.4593 x 0.4147 0.4299 0.4562 0.4373 y 0.3893 0.4260 0.4319 0.3944 y 0.3814 0.4165 0.4260 0.3893 Rank sw35 Rank sw40 x 0.3898 0.3996 0.4299 0.4147 x 0.3670 0.3736 0.3996 0.3898 y 0.3716 0.4015 0.
NICHIA STS-DA1-2554A CHROMATICITY DIAGRAM 0.50 0.45 sw27 sw30 0.40 sw35 y sw40 sw45 0.35 0.30 0.25 0.30 0.35 0.40 0.45 0.50 0.
NICHIA STS-DA1-2554A OUTLINE DIMENSIONS * 本製品はRoHS指令に適合しております。 This product complies with RoHS Directive. 管理番号 No. NSxx757A-V1 STS-DA7-3175 (単位 Unit:±0.2) mm) (単位 Unit: mm, 公差 Tolerance: 3 0.52 (2.6) 3 (2.6) (0.2) Cathode Mark Cathode 2.27 (0.6) (0.3) 2.6 Anode 1.43 0.
NICHIA STS-DA1-2554A SOLDERING • Recommended Reflow Soldering Condition(Lead-free Solder) 1 to 5°C per sec • Recommended Hand Soldering Condition 260°C Max 10sec Max Pre-heat 180 to 200°C Temperature 350°C Max Soldering Time 3sec Max 60sec Max Above 220°C 120sec Max 1.53 0.69 0.6 1.45 0.95 0.58 3.15 2 0.6 2.3 2.3 0.6 ● Recommended Metal Solder Stencil Aperture 0.85 0.85 2.3 3.15 ● Recommended Soldering Pad Pattern 0.6 0.
NICHIA STS-DA1-2554A TAPE AND REEL DIMENSIONS 3.5±0.05 Cathode Mark Nxxx757x STS-DA7-0958 (単位 Unit: mm) 0.2±0.05 3.18±0.1 2±0.05 1.75±0.1 4±0.1 Φ1.5+0.1 -0 管理番号 No. 8+0.3 -0.1 テーピング部 Tape 0.7±0.1 4±0.1 Φ1+0.2 -0 3.18±0.
NICHIA STS-DA1-2554A PACKAGING - TAPE & REEL シリカゲルとともにリールをアルミ防湿袋に入れ、熱シールにより封をします。 Reels are shipped with desiccants in heat-sealed moisture-proof bags. 管理番号 No. Nxxxxxxx STS-DA7-0006B ラベル Label リール Reel シリカゲル Desiccants XXXX LED TYPE Nxxxxxxx ******* LOT YMxxxx-RRR QTY. PCS RoHS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN 熱シール Seal アルミ防湿袋 Moisture-proof Bag アルミ防湿袋を並べて入れ、ダンボールで仕切ります。 Moisture-proof bags are packed in cardboard boxes with corrugated partitions.
NICHIA STS-DA1-2554A LOT NUMBERING SCHEME Lot Number is presented by using the following alphanumeric code.
NICHIA STS-DA1-2554A DERATING CHARACTERISTICS 管理番号 No. 周囲温度-許容順電流特性 Ambient Temperature vs Allowable Forward Current Derating1 カソード側はんだ接合部温度-許容順電流特性 Solder Temperature(Cathode Side) vs Allowable Forward Cu rrent RθJA =82°C/W Derating2 250 200 (70, 180) 許容順電流 150 100 (100, 70.
NICHIA STS-DA1-2554A OPTICAL CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 管理番号 No. Nx2L757Ax-V1 STS-DA7-3180 発光スペクトル Spectrum T A=25°C IFP=150mA Spectrum 1.0 相対発光強度 Relative Emission Intensity(a.u.) 0.8 0.6 0.4 0.2 0.
NICHIA STS-DA1-2554A FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電圧-順電流特性 Forward Voltage vs Forward Current 周囲温度-順電圧特性 Ambient Temperature vs Forward Voltage VfIf T A=25°C 1000 NS2L757A-V1 STS-DA7-3176 TaVf IFP=150mA 4.0 3.5 順電圧 Forward Voltage(V) 順電流 Forward Current(mA) 管理番号 No. 240 150 100 3.0 2.5 10 2.0 2.0 2.5 3.0 3.5 4.
NICHIA STS-DA1-2554A FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電流-色度特性 Forward Current vs Chromaticity C oordinate 管理番号 No. NS2L757A-V1 STS-DA7-3177 Ifxy TA=25°C 0.41 y 0.40 0.39 150mA 20mA 240mA 0.38 0.37 0.39 0.40 0.41 0.42 0.43 x 周囲温度-色度特性 Ambient Temperature vs Chromaticity C oordinate Taxy I FP= 150mA 0.41 0.40 -40°C y 0°C 25°C 0.39 50°C 100°C 0.38 0.
NICHIA STS-DA1-2554A
NICHIA STS-DA1-2554A CAUTIONS (1) Storage Conditions Storage Temperature Humidity Time Before Opening Aluminum Bag ≤30°C ≤90%RH Within 1 Year from Delivery Date After Opening Aluminum Bag ≤30°C ≤70%RH ≤168hours 65±5°C - ≥24hours Baking ● Product complies with JEDEC MSL 3 or equivalent. See IPC/JEDEC STD-020 for moisture-sensitivity details.
NICHIA STS-DA1-2554A (4) Design Consideration ● PCB warpage after mounting the products onto a PCB can cause the package to break. The LED should be placed in a way to minimize the stress on the LEDs due to PCB bow and twist. ● The position and orientation of the LEDs affect how much mechanical stress is exerted on the LEDs placed near the score lines. The LED should be placed in a way to minimize the stress on the LEDs due to board flexing.
NICHIA STS-DA1-2554A (8) Eye Safety ● In 2006, the International Electrical Commission (IEC) published IEC 62471:2006 Photobiological safety of lamps and lamp systems, which added LEDs in its scope. On the other hand, the IEC 60825-1:2007 laser safety standard removed LEDs from its scope. However, please be advised that some countries and regions have adopted standards based on the IEC laser safety standard IEC 60825-1:20112001, which still includes LEDs in its scope.