NICHIA STS-DA1-2228
NICHIA STS-DA1-2228 SPECIFICATIONS (1) Absolute Maximum Ratings Symbol Absolute Maximum Rating Unit Forward Current Item IF 80 mA Pulse Forward Current IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 296 mW Operating Temperature Topr -30~85 °C Storage Temperature Tstg -40~100 °C Junction Temperature TJ 100 °C * Absolute Maximum Ratings at TA=25°C. * IFP conditions with pulse width ≤10ms and duty cycle ≤10%.
NICHIA STS-DA1-2228 RANKS Item Rank Min Max Unit Forward Voltage - 2.95 3.70 V Reverse Current - - 100 µA 30.3 36.0 P11 Luminous Flux P10 25.5 30.3 P9 21.4 25.5 P8 18.0 21.4 lm Color Ranks Rank a0 Rank b3 x 0.280 0.264 0.283 0.296 x 0.287 0.283 0.304 0.307 y 0.248 0.267 0.305 0.276 y 0.295 0.305 0.330 0.315 Rank b4 Rank b5 x 0.307 0.304 0.330 0.330 x 0.296 0.287 0.307 0.311 y 0.315 0.330 0.360 0.339 y 0.276 0.295 0.
NICHIA STS-DA1-2228 CHROMATICITY DIAGRAM 0.45 0.40 c0 0.35 y b4 b3 0.30 b6 b5 a0 0.25 0.20 0.20 0.25 0.30 0.35 0.40 0.
NICHIA STS-DA1-2228 OUTLINE DIMENSIONS * 本製品はRoHS指令に適合しております。 This product complies with RoHS Directive. 管理番号 No. NSDx570GS-K1 STS-DA7-1024A (単位 Unit:±0.2) mm) (単位 Unit: mm, 公差 Tolerance: Φ5 1 5.3 1.5 MAX 1.1 (2.5) Cathode □0.5±0.05 Anode 5 6 5.6 9.8±0.5 26.3±1 (2) 内容 Description 樹脂材質 Resin Materials エポキシ樹脂(一部蛍光体入り) Epoxy Resin(partly using phosphor) リードフレーム材質 Lead Frame Materials 銅合金+銀メッキ Ag-plated Copper Alloy 質量 Weight 0.
NICHIA STS-DA1-2228 SOLDERING • Recommended Hand Soldering Condition • Recommended Dip Soldering Condition Temperature 350°C Max Pre-Heat 120°C Max Soldering Time 3sec Max Pre-Heat Time 60sec Max No closer than 3mm from Solder Bath the base of the lens. Temperature Position Dipping Time Dipping Position 260°C Max 10sec Max No closer than 3mm from the base of the lens. * For a better thermal performance, copper alloy is used for the leadframe of the product.
NICHIA STS-DA1-2228 PACKAGING - BULK 管理番号 No. Nxxxxxxx STS-DA7-0001B 袋の表示 Label printed on the bag 帯電防止袋 Anti-electrostatic Bag XXXX LED Type Nxxxxxxx ******* Lot YMxxxx-RRR Qty pcs RoHS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN CAUTION TO ELECTROSTATIC DAMAGE 静電気に注意 帯電防止袋を並べて入れ、 ダンボールで仕切ります。 Anti-electrostatic bags are packed in cardboard boxes with corrugated partitions. ラベル Label attached to the box XXXX LED TYPE Nxxxxxxx ******* RANK RRR QTY.
NICHIA STS-DA1-2228 LOT NUMBERING SCHEME Lot Number is presented by using the following alphanumeric code.
NICHIA STS-DA1-2228 DERATING CHARACTERISTICS NSDx570G(S)-K1 管理番号 No. STS-DA7-1025A 周囲温度-許容順電流特性 Ambient Temperature vs Allowable Forward Current Derating1 100 許容順電流 Allowable Forward Current(mA) (43, 80.0) 80 60 40 (85, 21.
NICHIA STS-DA1-2228 OPTICAL CHARACTERISTICS NSDW570G(S)-K1 管理番号 No. STS-DA7-2364 * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 発光スペクトル Spectrum T A=25°C IF=70mA Spectrum 1.0 相対発光強度 Relative Emission Intensity(a.u.) 0.8 0.6 0.4 0.2 0.
NICHIA STS-DA1-2228 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS NSDW570G(S)-K1 管理番号 No. STS-DA7-2365 * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電圧-順電流特性 Forward Voltage vs Forward Current 周囲温度-順電圧特性 Ambient Temperature vs Forward Voltage VfIf T A=25°C 1000 TaVf IFP= 70mA 5.0 順電圧 Forward Voltage(V) 順電流 Forward Current(mA) 4.5 200 100 70 4.0 3.5 3.0 2.5 10 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.
NICHIA STS-DA1-2228 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS NSDW570G(S)-K1 管理番号 No. STS-DA7-2366 * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電流-色度特性 Forward Current vs Chromaticity Coordinate Ifxy TA =25°C 0.34 0.33 y 10mA 20mA 70mA 80mA 0.32 200mA 0.31 0.30 0.29 0.30 0.31 0.32 0.33 x 周囲温度-色度特性 Ambient Temperature vs Chromaticity Coordinate Taxy I FP= 70mA 0.34 0.33 -30°C y 0°C 0.32 25°C 50°C 85°C 0.
NICHIA STS-DA1-2228 RELIABILITY (1) Tests and Results Reference Test Test Test Conditions Standard Duration Resistance to JEITA ED-4701 Tsld=260±5°C, 10sec, 1dip, Soldering Heat 300 302 3mm from the base of the lens JEITA ED-4701 Tsld=245±5°C, 5sec, 303 303A Lead-free Solder(Sn-3.0Ag-0.
NICHIA STS-DA1-2228 CAUTIONS (1) Lead Forming ● When forming leads, the leads should be bent at a point at lease 3mm from the base of the epoxy bulb. Do not use the base of the leadframe as a fulcrum during lead forming. ● Lead forming should be done before soldering. ● Do not apply any bending stress to the base of the lead. The stress to the base may damage the LED's characteristics or it may break the LEDs.
NICHIA STS-DA1-2228 (6) Electrostatic Discharge (ESD) ● The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.
NICHIA STS-DA1-2228 (10) Others ● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances).