NICHIA STS-DA1-1286
NICHIA STS-DA1-1286 SPECIFICATIONS (1) Absolute Maximum Ratings Symbol Absolute Maximum Rating Unit Forward Current Item IF 30 mA Pulse Forward Current IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 103 mW Operating Temperature Topr -30 ～ 85 °C Storage Temperature Tstg -40 ～ 100 °C Junction Temperature TJ 100 °C * Absolute Maximum Ratings at TA=25°C. * IFP conditions with pulse width ≤ 10 ms and duty cycle ≤ 10%.
NICHIA STS-DA1-1286 RANKS Item Rank Min. Max. Unit Forward Voltage - 2.65 3.45 V Reverse Current - - 50 µA U 8.4 11.8 T 5.9 8.4 S 4.2 5.9 Luminous Intensity cd Color Rank Rank L x 0.603 0.532 0.522 0.589 y 0.397 0.467 0.460 0.393 * Ranking at TA=25°C. * Reverse Current at VR=5V. * Tolerance of measurements of the Forward Voltage is ±0.05V. * Tolerance of measurements of the Luminous Intensity is ±10%.
NICHIA STS-DA1-1286 CHROMATICITY DIAGRAM 0.50 580 585 0.45 y L 590 0.40 595 600 0.35 0.30 0.45 0.50 0.55 0.60 0.
NICHIA STS-DA1-1286 OUTLINE DIMENSIONS * 本製品はRoHS指令に適合しております。 T his product complies with RoHS Directive. 管理番号 No. NSPA510BS STS-DA7-0046 (単位 Unit:±0.2) mm) (単位 Unit: mm, 公差 Tolerance: Anode □0.5 +0.1 -0.05 φ5 (2.5) 1.1 1.5 MAX Not Soldered 1 5.6 5.3 Cathode 7.3 8.3 12.1±0.5 (2) 28.6±1 0.3 0.
NICHIA STS-DA1-1286 SOLDERING • Dip Soldering • Hand Soldering Temperature 350°C Max. Pre-Heat 120°C Max. Soldering Time 3 sec. Max. Pre-Heat Time 60 sec. Max. No closer than 3mm from Solder Bath the base of the lens. Temperature Position Dipping Time Dipping Position 260°C Max. 10 sec.Max No closer than 3mm from the base of the lens. * Solder the LED no closer than 3 mm from the base of the lens. Soldering beyond the base of the tie bar is recommended.
NICHIA STS-DA1-1286 PACKAGING - BULK 管理番号 No. Nxxxxxxxx STS-DA7-0001 袋の表示 Label printed on the bag 帯電防止袋 Anti-electrostatic Bag XXXX LED Type Nxxxxxxxx ******* Lot YMxxxx-RRR Qty pcs RoHS NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN CAUTION TO ELECTROSTATIC DAMAGE 静電気に注意 帯電防止袋を並べて入れ、ダンボールで仕切ります。 The anti-electrostatic bags are packed in a cardboard box with corrugated partition. ラベル Label attached to the box XXXX LED TYPE Nxxxxxxxx ******* RANK RRR QTY.
NICHIA STS-DA1-1286 LOT NUMBERING SCHEME Lot Number is presented by using the following alphanumeric code.
NICHIA STS-DA1-1286 DERATING CHARACTERISTICS 管理番号 No. NSPA510B(S) STS-DA7-0101 周囲温度 - 許容順電流特性 Ambient Temperature vs Allowable Forward Current Derating1 許容順電流 Allowable Forward Current (mA) 50 40 (47, 30.0) 30 20 10 (85, 8.
NICHIA STS-DA1-1286 OPTICAL CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 管理番号 No. 発光スペクトル Spectrum NSPA510B(S) STS-DA7-0102 T A = 25°C IF = 20 mA Spectrum 1.0 相対発光強度 Relative Emission Intensity (a.u.) 0.8 0.6 0.4 0.2 0.
NICHIA STS-DA1-1286 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電圧 - 順電流特性 Forward Voltage vs Forward Current 管理番号 No. 周囲温度 - 順電圧特性 Ambient Temperature vs Forward Voltage VfIf T A = 25°C 100 NSPA510B(S) STS-DA7-0103 IFP = 5 mA IFP = 20 mA IFP = 60 mA TaVf 5.0 順電圧 Forward Voltage (V) 順電流 Forward Current (mA) 4.5 20 10 4.0 3.5 3.0 2.5 1 2.0 2.0 2.5 3.0 3.5 4.0 4.5 5.
NICHIA STS-DA1-1286 FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS * 本特性は参考です。 All characteristics shown are for reference only and are not guaranteed. 順電流 - 色度特性 Forward Current vs Chromaticity Coordinate 管理番号 No. NSPA510B(S) STS-DA7-0104 Ifxy TA = 25°C 0.445 0.440 y 100 mA 20 mA 1 mA 0.435 0.430 0.425 0.550 0.555 0.560 0.565 0.570 x 周囲温度 - 色度特性 Ambient Temperature vs Chromaticity Coordinate Taxy IFP = 20 mA 0.445 0.440 y -30°C 0°C 25°C 50°C 85°C 0.
NICHIA STS-DA1-1286
NICHIA STS-DA1-1286 CAUTIONS (1) Lead Forming ● When forming leads, the leads should be bent at a point at lease 3mm from the base of the epoxy bulb.Do not use the base of the leadframe as a fulcrum during lead forming. ● Lead forming should be done before soldering. ● Do not apply any bending stress to the base of the lead. The stress to the base may damage the LED's characteristics or it may break the LEDs.
NICHIA STS-DA1-1286 (6) Electrostatic Discharge (ESD) ● The products are sensitive to static electricity or surge voltage. An ESD event may damage its die or reduce its reliability performance. When handling the products, measures against electro static discharge, including the followings, are strongly recommended.
NICHIA STS-DA1-1286 (10) Others ● The LEDs described in this brochure are intended to be used for ordinary electronic equipment (such as office equipment, communications equipment, measurement instruments and household appliances).
